• Tubing (patient circuit) as shown – see configuration details for exact contents.

For Use in Dynamic Environments

Trilogy Evo is designed for use in a wide variety of care settings, including sub acute and chronic care facilities, patients’ homes and during daily activities. The housing and accessories are built for durability to withstand movement and transport, including use on roll stands, trolleys and wheelchairs.

Long Lasting Battery Life

Ventilator dependent patients benefit from both an internal and a detachable lithium ion battery, providing up to 15 hours of nominal run time in total. This offers more freedom and security compared with older systems, and supports use on the move with roll stand or wheelchair mounts and a carry bag.

Meeting Changing Patient Needs

Trilogy Evo provides invasive and non invasive support with sensitivity suitable for a broad range of adult and paediatric patients. Volume and pressure modes, AVAPS AE, plus optional SpO₂ and EtCO₂ monitoring and alarms for every parameter, allow flexible and responsive care. The system supports multiple circuit configurations to match different clinical requirements.

Streamlined Data Accessibility

Trilogy Evo uses Bluetooth connectivity to send patient and device data to Care Orchestrator, Philips cloud based management platform. This supports coordinated care, adherence monitoring and protocol driven follow up. Data can also be downloaded locally at the point of care via USB for review and documentation.

Ventilation Modes

• A/C PC – Assist control (pressure control).
• A/C VC – Assist control (volume control).
• CPAP – Continuous positive airway pressure.
• PSV – Pressure support ventilation.
• S/T – Spontaneous timed ventilation.
• SIMV PC – Synchronous intermittent mandatory ventilation, pressure control.
• SIMV VC – Synchronous intermittent mandatory ventilation, volume control.
• MPV PC – Mouthpiece ventilation, pressure control.
• MPV VC – Mouthpiece ventilation, volume control.
• Advanced options including AVAPS, Auto Trak and dual limb circuits as configured.

Physical Characteristics

• Weight: 5.2 kg.
• Size: 16.5 cm D × 28.6 cm W × 24.5 cm H (6.48 in D × 11.25 in W × 9.65 in H).
• Screen dimensions: 8 in (20.32 cm).

Oxygen

• Low flow: 0 to 30 l/min, maximum 10 psi.
• High pressure inlet: 280 to 600 kPa (41 to 87 psi).

Measured and Displayed Patient Parameters

• Tidal volume (Vti or Vte): 0 to 2000 ml.
• Minute ventilation (MinVent): 0 to 30 l/min.
• Leak: 0 to 200 l/min.
• Respiratory rate: 0 to 90 breaths per minute.
• Peak inspiratory flow: 0 to 200 l/min.
• Peak inspiratory pressure: 0 to 90 cm H₂O.
• Mean airway pressure: 0 to 90 cm H₂O.
• Percentage spontaneous triggered breaths: 0 to 100 percent.
• I:E ratio: 9.9:1 to 1:9.9.
• Dynamic compliance: 1 to 100 ml/cm H₂O.
• Dynamic resistance: 5 to 200 cm H₂O/l/sec.
• Dynamic plateau pressure: 0 to 90 cm H₂O.
• Auto PEEP: 0 to 20 cm H₂O.
• FiO₂ with sensor: 21 to 100 percent.
• SpO₂ with oximeter accessory: 0 to 100 percent.
• Pulse rate with oximeter accessory: 18 to 321 beats per minute.
• EtCO₂ with CO₂ accessory: 0 to 150 mmHg.

Electrical

• AC input voltage: 100 to 240 V, 50/60 Hz, 1.7 to 0.6 A.
• DC input voltage: 12/24 V, 6.5 A.
• Internal and detachable Li ion batteries: nominal total run time 15 hours (approximately 7.5 hours per battery), tested in accordance with IEC 80601 2 72.
• Charge time: 0 to 80 percent in approximately 2.5 hours, 0 to 100 percent in approximately 3.5 hours.

Alarm Ranges

• Inspiratory pressure: PEEP + 1 to 89 cm H₂O.
• Tidal volume: Off, 10 to 2000 ml.
• Minute ventilation: Off, 0.2 to 30 l/min.
• Respiratory rate: Off, 1 to 90 breaths per minute.
• Circuit disconnection: Off, 5 to 60 seconds.
• Apnoea interval: 5 to 60 seconds.
• No trigger (MPV only): Off, 0.5 to 15 minutes.

Controls

• AVAPS with passive circuit: available in PSV, S/T and A/C PC modes.
• Tidal volume set range: 35 to 2000 ml (dual limb and active flow circuits), 50 to 2000 ml (passive and active PAP circuits).
• Breath rate: 0 to 80 breaths per minute.
• PEEP: 0 to 35 cm H₂O (active circuits), 3 to 25 cm H₂O (passive circuits).
• EPAP/CPAP: 3 to 25 cm H₂O.
• IPAP: 3 to 60 cm H₂O.
• Pressure support or pressure control: 0 to 60 cm H₂O.
• Inspiratory time: 0.3 to 5.0 seconds.
• Rise time: 0 to 6.
• Triggering and cycling: Off, AutoTrak, Sensitive, Flow Trigger.
• Flow trigger sensitivity: 0.5 to 9 l/min.
• Flow cycle sensitivity: 10 to 90 percent of peak flow.
• Flow pattern: Square or Ramp.
• FiO₂ set range: 21 to 100 percent.
• Inspiratory time minimum/maximum: 0.3 to 3.0 seconds.
• Backup ventilation: On or Off.