Philips Trilogy Evo Portable Hospital-to-Home Ventilator

Ventilator for Reliable Portable and Long-Term Respiratory Support

The Philips Trilogy Evo Ventilator is a next-generation, portable life-support device designed to deliver consistent, high-performance ventilation across hospital, transport, and home-care environments. This ventilator provides both invasive and non-invasive ventilation for adult and paediatric patients, ensuring smooth transitions from hospital to home without compromising care quality.

Engineered with advanced monitoring and adaptive algorithms, the Philips Trilogy Evo automatically adjusts to changes in patient condition and leak dynamics. It supports a wide range of ventilation modes, including pressure control, volume control, and spontaneous timed ventilation. With an internal battery offering up to 15 hours of operation and an intuitive touchscreen interface, it ensures flexibility, mobility, and continuous patient safety in all settings.

Specifications

Ventilation modes

A/C-PC	Assist control (pressure control)
A/C-VC	Assist control (volume control)
CPAP	Continuous positive airway pressure
PSV	Pressure support ventilation
S/T	Spontaneous/timed ventilation
SIMV-PC	Synchronized intermittent mandatory ventilation (pressure control)
SIMV-VC	Synchronized intermittent mandatory ventilation (volume control)
MPV-PC	Mouthpiece ventilation (pressure control)
MPV-VC	Mouthpiece ventilation (volume control)

Physical

Weight	5.2 kg
Size	16.5 cm D x 28.6 cm W x 24.5 cm H 6.48” D x 11.25” W x 9.65” H
Screen dimensions	8”, 20.32 cm

Oxygen

Low flow	0 to 30 l/min; maximum 10 psi
High pressure	280 to 600 kPa (41 to 87 psi)

Measured and displayed patient parameters

Tidal volume (Vti or Vte)	0 to 2000 ml
Minute ventilation (MinVent)	0 to 30 l/min
Leak	0 to 200 l/min
Respiratory rate (RR)	0 to 90 BPM
Peak inspiratory flow (PIF)	0 to 200 l/min
Peak inspiratory pressure (PIP)	0 to 90 cmH2O
Mean airway pressure	0 to 90 cmH2O
Percentage spontaneous triggered breaths (%Spont Trig)	0 to 100%
I:E ratio	9.9:1 to 1:9.9
Dynamic compliance (Dyn C)	1 to 100 ml/cmH2O
Dynamic resistance (Dyn R)	5 to 200 cmH2O/l/sec
Dynamic plateau pressure (Dyn Pplat)	0 to 90 cmH2O
Auto-PEEP	0 to 20 cmH2O
FiO2 with FiO2 sensor	21% to 100%
SpO2 with pulse oximeter accessory	0 to 100%
Pulse rate with pulse oximeter accessory	18 to 321 beats per minute
EtCO2 with CO2 accessory	0 to 150 mmHg

Electrical

AC input voltage	100V - 240V, 50/60 Hz, 1.7 - 0.6A
DC input voltage	12/24V 6.5A
Internal and detachable Li-on batteries	15 hours’ nominal total run time per method in IEC 80601-2-72 (7.5 hours each battery)
Charge time for detachable and internal battery	from 0% to 80%: 2.5 hours; from 0% to 100%: 3.5 hours

Alarms

Inspiratory Pressure	PEEP+1 to 89 cmH2O
Tidal Volume	OFF, 10 - 2000 ml
Minute Ventilation	OFF, 0.2 - 30 L/min
Respiratory Rate	OFF, 1 - 90 BPM
Circuit Disconnection	OFF, 5 - 60 sec
Apnea Interval	5 to 60 sec
No trigger	OFF; 0.5-15 min (ONLY in MPV)

Controls

AVAPS with passive circuit	PSV, S/T, and A/C-PC modes only
Tidal volume	35 - 2000 ml on Dual Limb and Active Flow circuits, 50 - 2000 ml on passive and active PAP circuits
Breath rate	0 - 80 BPM
PEEP	0 - 35 cmH20 for active circuits 3 - 25 cmH20 for passive circuits
EPAP/CPAP	3 to 25 cmH20
IPAP	3 to 60 cmH20
Pressure support/pressure control	0 to 60 cmH20
Inspiratory time	0.3 - 5.0s
Rise time	0 to 6
Triggering and cycling	Off, AutoTrak, Sensitive, AutoTrak, and Flow Trigger
Flow trigger sensitivity	0.5 - 9 l/min
Flow cycle sensitivity	10% - 90% of peak flow
Flow pattern	Square, Ramp
FiO2	21% - 100%
Inspiratory time min/max	0.3 to 3.0 sec
Backup ventilation	ON-OFF

Documentation

Whitepaper

• Trilogy Evo Bench Study Whitepaper  (384.4 kB) 

Ordering information

• Trilogy Evo Accessory Guide global  (12.7 MB)