What to Look for in the Jenx Prone Stander 2: A Buyer's Guide

• Understanding What the Jenx Prone Stander 2 Is and Does
• Key Components to Check Before Buying
• Regulatory and Safety Obligations
• What Is and Is Not Typically Included
• Summary: What to Confirm Before Purchase

The Jenx Prone Stander 2 is a postural management device designed to support children in a prone standing position, distributing weight through the lower limbs while maintaining trunk alignment. Selecting the right unit, whether new or pre-owned, requires attention to several specific factors. This guide covers the key areas a clinician, therapist or procurement officer should assess before committing to a purchase.

Understanding What the Jenx Prone Stander 2 Is and Does

Basic function and intended use

The Jenx Prone Stander 2 is a piece of prescribed postural equipment. It supports the user in a forward-leaning, prone standing orientation. The frame allows the child to bear weight through the legs while supported across the chest, abdomen and hips. It is used within a planned postural management programme and should be prescribed and fitted by a qualified clinician.

Weight and size range

Each Jenx Prone Stander 2 is supplied in a specific size to match the user's height and weight range. Confirm the size designation before ordering. Sizes are not interchangeable between significantly different users, and fitting a wrong size can compromise both support and safety. Ask the prescribing therapist to confirm the required size in writing before purchase.

Adjustability

The unit includes adjustable components to accommodate growth within a size band. Key adjustable elements typically include the trunk support height, the hip and knee prompts, and the tray position. Verify which of these adjustments remain functional on any pre-owned unit and whether they move freely through their full range.

Jenx Prone Stander 2 £599.99 Buy nowView product

Key Components to Check Before Buying

Frame integrity

Inspect the frame for cracks, deformation or weld failures, particularly at load-bearing joints. On pre-owned units, check that all locking mechanisms engage positively and do not slip under light load. Photographs form part of the description on any listed item, so review them carefully and ask for additional images of joints and adjustment points if they are not shown.

Padding and soft goods

Padding on the chest support, hip support and knee prompts is a consumable. It degrades with use and is subject to hygiene requirements. On pre-owned units, padding is frequently worn, compressed or soiled. Replacement padding is available separately and should be budgeted for. Do not assume that padding present on a used unit is serviceable without inspection.

Castors and braking

The Jenx Prone Stander 2 is mounted on castors with individual brakes. Check that all castors roll freely and that each brake engages and holds the unit stationary. A brake that fails to hold is a safety-critical defect. This point is not negotiable: the unit should not be placed in service until all brakes are confirmed functional by a competent person.

Tray condition

The activity tray supports upper limb activity during standing sessions. Check the tray surface for cracks, sharp edges or missing attachment points. On pre-owned units, the tray may have been replaced or may not be included. Clarify whether the tray is included before ordering. Sold separately if absent.

Regulatory and Safety Obligations

LOLER and PUWER compliance

As a device used to support and partially bear the weight of a person, the Jenx Prone Stander 2 falls within the scope of the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) and the Provision and Use of Work Equipment Regulations 1998 (PUWER). The operating organisation is responsible for ensuring a thorough examination by a competent person is carried out at the required intervals. This is not discharged by a seller's dispatch inspection.

Decontamination before use

Any pre-owned postural support equipment must be decontaminated before use with a new user. The operating organisation is responsible for following an appropriate decontamination protocol. Manufacturer instructions take precedence over any general guidance in this article. Confirm the decontamination procedure with your infection control team before the equipment enters clinical or home use.

Service history

Request documentation of the service history where available. A unit with no recorded history is not necessarily unsafe, but the absence of records places a greater burden on the receiving organisation to carry out its own assessment. Planned maintenance and periodic safety checks remain with the operating organisation regardless of the dispatch condition stated by the seller.

What Is and Is Not Typically Included

Items commonly included with the Jenx Prone Stander 2

• Main frame, the core structural assembly including the prone support surface and adjustment mechanism
• Chest support, fixed to the frame, condition varies on pre-owned units
• Hip and knee prompts, may be adjustable or fixed depending on configuration
• Castors with brakes, factory-fitted, check all four on pre-owned units
• Activity tray, confirm inclusion before ordering as it is frequently absent on pre-owned units

Items frequently not included or sold separately

• Replacement padding sets, consumable, available separately, budget accordingly
• Lateral trunk supports, optional accessories, not standard on all configurations
• Head support, not included unless explicitly stated
• Slings or harness accessories, sold separately, ask before ordering
• Manufacturer documentation, may not be present on pre-owned units, download from Jenx directly

Summary: What to Confirm Before Purchase

Buying a Jenx Prone Stander 2, new or pre-owned, requires a structured check rather than a general visual review. The points below cover the minimum a buyer should confirm before committing.

• Correct size for the intended user, confirmed in writing by the prescribing therapist
• Frame free from cracks, deformation and weld failures
• All adjustment mechanisms functional through their full range
• All castor brakes engaging and holding
• Padding condition assessed and replacement budgeted if required
• Tray included or separately sourced
• Decontamination protocol confirmed with infection control
• LOLER thorough examination scheduled with a competent person before the unit enters service
• Service history requested and reviewed where available

If any of these points cannot be confirmed from the listing information provided, ask before ordering. A pre-owned unit that is correctly specified, structurally sound and appropriately decontaminated can represent straightforward value for a clinical service. A unit that is the wrong size or has unresolved mechanical defects does not, regardless of price.

Ready to move forward with the Jenx Prone Stander 2? Shop the Jenx Prone Stander 2