Needs Help?
24/7 Chat Available
24/7 Chat Available
Pre-owned
Brand
Edan
Leeds, United Kingdom
- UK stock, dispatched from Leeds
All products / Patient Monitor
Edan iM3 Patient Monitor with NIBP & SPO2
Price
£19999
Price shown excludes VAT.
Quantity
Unit price£199.99
Total£199.99
You save£0.00
Free UK mainland delivery on orders over £300
Frequently bought together
Add the whole set in one go.
Total for the set
£0.00
Build Your Bundle
Key attributes
- Brand
- Edan
- Category
- Patient Monitor
- SKU
- EDP214201
Edan iM3 Vital Signs Patient Monitor, Pre-Owned
The Edan iM3 is an ultra-slim vital signs monitor built around an 8 inch capacitive touchscreen. It measures SpO2, non-invasive blood pressure, pulse rate and temperature, and switches between three working modes: continuous monitoring at the bedside, spot check for rapid observations, and a rounds mode that carries a patient list through a ward round and records against each name.
This unit is pre-owned and comes with its SpO2 finger sensor, extension lead, adult NIBP cuff and tube. A rolling stand is available with it but is not included in the shipped price, and the arrangements for that are set out below.
The stand, collection and carriage
- The rolling stand is not covered by the shipping price shown for the monitor, because of its size and weight.
- It can be collected in person at no additional charge, by arrangement.
- Where collection is not practical, the buyer arranges their own carrier for the stand and Elarix makes it ready for that collection.
- The monitor itself ships normally, with or without the stand.
Verify performance before clinical use
- This is a measuring device. Non-invasive blood pressure, SpO2 and temperature accuracy are verified against a suitable simulator or reference before the monitor is used on patients.
- Electrical safety testing is carried out on receipt, as for any pre-owned mains powered medical device.
- Alarm limits, patient category and any early warning score configuration are set by the receiving organisation to its own protocols and never left as they were found.
- No calibration certificate is supplied with this unit.
Why the three work modes matter
Most vital signs monitors are built for one job, and the mismatch shows up as soon as the workflow changes. A continuous bedside monitor asked to do a set of ward observations produces a stream of data nobody wanted and no record against a patient name. A spot check device asked to watch a deteriorating patient has no trending and no alarms worth the name. The iM3 carries three configurations in one unit: monitoring mode with real-time display, alarms and trend, spot check mode for a single set of observations, and rounds mode, which is the one that changes the working day.
In rounds mode the patient list is loaded onto the monitor, from a USB drive or from the record system, and the trolley goes round the bay taking observations against each name in turn, with colour coding showing who has been done and who has not. The measurements come back off the monitor as a report rather than being copied onto paper and typed in later, which removes the transcription step where most observation errors are introduced. For a ward doing four rounds a day that is the difference between the monitor being a device and being part of the documentation process.
Two things are worth checking before buying. Configuration varies considerably on this platform: SpO2 can be the Edan module or Nellcor, blood pressure can be Edan or SunTech, temperature can be an oral module, infrared ear, non-contact or temporal, and Wi-Fi and the barcode scanner are options rather than standard. A pre-owned unit is whatever it was ordered as, so the modules on the individual monitor decide what accessories fit it. And this is a vital signs monitor rather than a full multiparameter monitor: there is no ECG trace, no invasive pressure and no capnography, so anyone needing those is looking at a different class of device.
Key features
Three work modes in one unit, covering continuous monitoring, spot check and rounds, so one device serves the bedside, the clinic room and the ward round without being reconfigured between them.
Rounds mode with a loaded patient list, taking a patient map by USB or from the record system and colour coding progress, so observations are recorded against the right name at the point they are taken.
8 inch capacitive touchscreen at 800 by 600, giving direct access to parameters and shortcuts rather than stepping through a knob menu, which shortens each observation set.
Alarm light visible from any angle, mounted so an alarming monitor is seen from across a bay rather than only from the foot of the bed.
Ultra-slim design under 2.5 kg, with a cable-receiving carry handle, so the unit moves between rooms in one hand with the leads stowed rather than trailing.
Fanless construction, which removes a noise source at the bedside and a dust path through the instrument.
Substantial on-board storage, holding trend data, alarm events and a large body of spot check records, with data retained through a power-off so a session is not lost.
Battery operation, with a lithium-ion pack running away from mains power for the length of a round, and auto standby to preserve charge between measurements.
USB transfer and record system compatibility, so observations reach the patient record without a transcription step.
Specification limited to what is confirmed
- Figures above are manufacturer data for the iM3 platform. Which SpO2, blood pressure and temperature modules this individual unit carries, whether it has Wi-Fi or a barcode scanner, and which battery is fitted are confirmed against the unit on request.
- Serial number, software version and hours in service are not published here and are read from the monitor on request.
- Screen tilt angle and the presence of a carbon dioxide option, both stated in an earlier description of this product, are not supported by the manufacturer documentation and have been left out rather than repeated.
Condition and history
Pre-owned, previously in clinical service, with cosmetic marks consistent with that use. Photographs form part of the description and show the actual unit offered.
Checked before dispatch, with the monitor powered on, the touchscreen and work modes navigated, the NIBP pump and SpO2 channel exercised, and the case, sockets and battery compartment inspected. Damaged or non-working items are not dispatched.
No service history or calibration certificate is supplied, and this item may require service and calibration. Ongoing maintenance sits under PUWER 1998 with the organisation operating the equipment, alongside periodic electrical safety testing.
Routine checks and care
| Task | Interval |
|---|---|
| Wipe the case, screen and leads with an approved disinfectant | Between patients |
| Inspect the NIBP tube and cuff for splits, and the SpO2 lead for damaged insulation | Before every session |
| Check alarm limits and patient category are set for the patient in front of the monitor | Every use |
| Run the battery down and recharge fully to keep the pack conditioned | Monthly |
| NIBP, SpO2 and temperature accuracy verification, and electrical safety testing | Annually, and after any repair or transport |
Intervals follow common practice for vital signs monitors and are adjusted to the manufacturer instructions and local medical device policy.
Technical specifications
- Manufacturer
- Edan
- Model
- iM3
- Device type
- Vital signs monitor
- Condition
- Pre-owned
- Standard parameters
- SpO2, non-invasive blood pressure, pulse rate
- Temperature
- Module dependent, including oral, infrared ear, non-contact and temporal options
- Work modes
- Continuous monitoring, spot check, rounds
- Display
- 8 inch colour TFT LCD capacitive touchscreen, 800 by 600
- NIBP measuring range, adult
- Systolic 25 to 290 mmHg, diastolic 10 to 250 mmHg, mean 15 to 260 mmHg
- Cuff pressure range
- 0 to 300 mmHg, resolution 1 mmHg
- Typical NIBP measuring period
- 20 to 35 seconds, depending on heart rate and movement
- Battery
- Rechargeable lithium-ion. 2400 mAh option gives about 3.5 hours, 4800 mAh option about 10 hours
- Power supply
- 100 to 240 V AC, 50 to 60 Hz
- Interfaces
- USB, micro USB, network, nurse call
- Dimensions (W x H x D)
- 159 x 262 x 166 mm
- Weight
- Under 2.5 kg
Specifications can change without notice. Ask us for the current technical file.
Further documentation is available on request.
What is in the box
- Item
- Detail
- Condition
- Edan iM3 monitor
- Main unit, powered on and checked before dispatch
- USED
- SpO2 finger sensor and extension cable
- Reusable adult finger sensor with 7 pin extension lead
- USED
- NIBP cuff and tube
- Adult cuff with its connecting tube
- USED
- Mains power lead
- Confirmed against the individual unit before dispatch
- USED
What is not included
- Item
- Detail
- Status
- Rolling stand
- Available with this monitor. See the collection note below
- ADD-ON
- Temperature probe and probe covers
- Depends on which temperature module the unit carries
- ADD-ON
- Barcode scanner
- Factory option, fitted only on units specified with it
- NOT INCLUDED
Shipping and returns
Ordered before 1pm Monday to Friday, dispatched the same working day from Leeds. Deliveries run Monday to Saturday, never Sunday.
UK mainland, light items: 1 to 2 working days. Heavy and bulky: 2 to 4 working days.
Customs and duties
International orders ship on a Delivered At Place basis. Import duty, local tax and customs clearance fees are charged by the destination country and are the buyer's responsibility.
Delivery estimate
Returns
Unopened items can be returned within 30 days of delivery. Tell us before you send anything back so we can give you a returns reference.
Opened items that touch the airway cannot be returned for hygiene reasons unless they are faulty.
This does not affect your statutory rights.
Refund
Refunds are issued to the original payment method once the returned item reaches us and has been checked, normally within five working days.
Faulty items are refunded in full, including the delivery you paid.
Information on this page is provided for guidance and does not replace advice from a qualified clinician. Always read the manufacturer's instructions before use, and check that a device is suitable for the patient and the prescribed therapy.
Ordered with this
Goes on the same order.
Other lines in this category
More in the same category.
Recently viewed
Picking up where you left off.
Reviews
Written by people who bought from us.
UK Mainland Next Day Delivery
Order by 1pm, Mon-Fri. Delivery available Mon-Sat.
VAT Relief Available
For eligible patients & conditions
Meical Equipment Advice and Guidance
Latest from Our Blog
October 04, 2026
Alvera AirLink 360 Swivel Explained: What It Is and How It Works
The Alvera AirLink 360 Swivel is a 360-degree rotational CPAP connector that reduces tubing drag and helps maintain mask seal throughout ...
Read Article
October 04, 2026
Alvera AirLink Mini Mask Adapter Twin: Questions Buyers Ask Before Ordering
An honest pre-purchase guide to the Alvera AirLink Mini Mask Adapter Twin covering compatibility, included items, cleaning and clinical u...
Read Article
October 04, 2026
ALVERA PureGuard™ Universal In-Line Bacteria Filter: Common Mistakes and How to Avoid Them
Avoid the most common fitting, replacement and compatibility mistakes with the ALVERA PureGuard™ Universal In-Line Bacteria Filter. Pract...
Read Article