24/7 Chat Available
24/7 Chat Available
Pre-owned
−10%at checkout · BLACKFRIDAY10
Black Friday · ends Monday 30 November, 23:59
Price shown excludes VAT.
VAT relief available on this product
Eligible customers can claim VAT relief on this product at checkout.
−10%at checkout · BLACKFRIDAY10
Black Friday · ends Monday 30 November, 23:59
Price shown excludes VAT.
VAT relief available on this product
Eligible customers can claim VAT relief on this product at checkout.
VAT relief applied — no VAT will be charged at checkout.
✓ FREE UK mainland delivery on this item
Add the whole set in one go.
Aquamantys System Electrosurgical Unit
£299.99
Sam 420LX MGE Suction Equipment Low Flow High Vacuum
£164.99
SAM e.p.s. Suction Pump
£199.99
The ERBE ICC 80 is a high frequency electrosurgical generator delivering up to 80 W of cutting and 50 W of coagulation at a rated frequency of 350 kHz, with two cutting effects and three coagulation modes, supplied here with a dual pedal footswitch. It is a compact bench generator at 275 by 105 by 255 mm and 2.8 kg, built for monopolar and bipolar work in a treatment room, a minor operations suite, a dermatology or gynaecology clinic, or an endoscopy list.
The two cutting effects are the part of the specification worth reading closely, because they are not two power settings but two different waveforms. Cut Effect 1 is an unmodulated sine wave with a crest factor of 2 and a peak voltage of 500 V. A continuous waveform at that crest factor sustains the cutting arc with the least peak voltage for the power delivered, which is the setting for a clean incision with minimal lateral thermal spread. Cut Effect 2 is pulse modulated to a crest factor of 4 at 800 V peak. The higher peak voltage and the gaps between pulses mean that each burst cuts and the intervals coagulate, so the incision closes small vessels as it goes. Both run from 1 to 80 W in 1 W steps against a 500 ohm load, with power limitation held to plus or minus 5 per cent.
Three coagulation modes cover the same ground from different directions. Soft coagulation is unmodulated at 50 W into 200 ohms with a maximum open circuit peak of 190 V, and at that voltage no arc forms, so the mode coagulates by direct contact without carbonising tissue or welding the electrode to it. Forced coagulation is pulse modulated at 50 W into 500 ohms with a peak of 900 V, which does arc, giving faster and deeper coagulation at the cost of surface carbonisation. Bipolar coagulation runs at 50 W into 200 ohms at 190 V peak, with the current confined between the two tips of the forceps so that no neutral electrode sits in the circuit at all.
The dual footswitch is not an accessory on this generator but part of how it is operated. ERBE specify cutting and both monopolar coagulation modes as activated by either a handpiece key or a pedal, and bipolar coagulation as activated by pedal only, so a unit used for bipolar work needs the footswitch present. The high frequency output is a floating circuit referenced to the neutral electrode rather than to earth, and the unit carries a potential equalisation terminal on the rear, is protection class I to EN 60601-1, and has a type CF applied part to IEC 601-1.
| Brand | ERBE |
| Model | ICC 80 |
| Device type | High frequency electrosurgical generator |
| Maximum cutting power | 80 W at 500 ohms |
| Maximum coagulation power | 50 W |
| Rated frequency | 350 kHz |
| Modes | Cut Effect 1, Cut Effect 2, soft coagulation, forced coagulation, bipolar coagulation |
| Footswitch | Dual pedal, supplied |
| Condition | Pre-owned |
Points to note before ordering
Bipolar coagulation is pedal activated only. ERBE specify cutting and the two monopolar coagulation modes as activated by handpiece key or pedal, and bipolar coagulation as pedal only. A generator intended for bipolar work depends on the footswitch being present and functioning.
Specifications can change without notice. Ask us for the current technical file.
Ordered before 1pm Monday to Friday, dispatched the same working day from Leeds. Deliveries run Monday to Saturday, never Sunday.
UK mainland, light items: 1 to 2 working days. Heavy and bulky: 2 to 4 working days.
International orders ship on a Delivered At Place basis. Import duty, local tax and customs clearance fees are charged by the destination country and are the buyer's responsibility.
This item is pre-owned and comes with a 90-day SelfiMed warranty, starting on the day it is delivered.
Read the full returns and warranty policy
This does not affect your statutory rights.
Information on this page is provided for guidance and does not replace advice from a qualified clinician. Always read the manufacturer's instructions before use, and check that a device is suitable for the patient and the prescribed therapy.
Goes on the same order.
More in the same category.
Picking up where you left off.
Written by people who bought from us.
Meical Equipment Advice and Guidance
October 04, 2026
The Alvera AirLink 360 Swivel is a 360-degree rotational CPAP connector that reduces tubing drag and helps maintain mask seal throughout ...
Read Article
October 04, 2026
An honest pre-purchase guide to the Alvera AirLink Mini Mask Adapter Twin covering compatibility, included items, cleaning and clinical u...
Read Article
October 04, 2026
Avoid the most common fitting, replacement and compatibility mistakes with the ALVERA PureGuard™ Universal In-Line Bacteria Filter. Pract...
Read ArticleSelfiMed UK
BLACK FRIDAY
+ up to −80% on selected items, no code needed
Join our list for deal alerts, restocks and CPAP tips. Your code appears straight away.
Free UK mainland delivery over £300 · next-day dispatch before 1pm
By signing up you agree to receive marketing emails from SelfiMed UK. Unsubscribe at any time. Code valid on all products until Monday 30 November 23:59. One discount per item: items already at −50% or −80% keep that deal instead.
It's already in your basket, so 10% comes off at checkout.
Valid on all products. One discount per item. Ends Monday 30 November 23:59.