Eschmann Little Sister SES 113 Autoclave N-type (non-vacuum) model

Eschmann Little Sister SES 113 Autoclave

The Eschmann Little Sister SES 113 is a bench-top N-type displacement autoclave with an 11-litre chamber, designed for the rapid sterilisation of solid unwrapped instruments in GP surgeries, dental practices, clinical rooms and veterinary settings. One-touch cycle initiation and self-checking systems make it straightforward to operate, and the twin onboard water reservoirs use just 350ml of fresh water per cycle, eliminating the risk associated with separate external containers. A water level sensor prevents hot waste water from being spilled during drainage. Direct Data Download (DDD) software is included as standard, storing all cycle records on the unit for compliance and audit purposes. Built in accordance with BS EN 13060 and Department of Health guidelines. This unit is offered as a working second-hand item. The front cover flap is broken off; all other functions are unaffected.

Key Features

• 11-litre chamber - accommodates up to 6 examination trays (180 x 140mm)
• N-type displacement sterilisation - suitable for solid unwrapped instruments for immediate use and aseptic storage
• One-touch cycle initiation - intuitive single-button operation; PIN-protected cycle options available
• Self-checking cycles - automatic pre-cycle checks confirm readiness before every sterilisation cycle
• Twin onboard water reservoirs - use just 350ml of clean water per cycle; water level sensors prevent hot waste water spillage
• Direct Data Download (DDD) - all cycle records stored on the unit; downloadable for compliance and audit purposes
• Fast cycle times - N-type cycle without drying in 12 minutes; with drying in 30 minutes
• BS EN 13060 compliant - designed in accordance with European autoclave standards and Department of Health guidelines
• PSSR 2000 service compatible - supports pressure system safety regulation certification and HTM 2010 testing

Cycle Times

Suitable Loads

Please note: This is a used unit offered in working condition. The front cover flap is broken off; all operational functions are unaffected. The SES 113 is an N-type non-vacuum autoclave suitable for solid unwrapped instruments only. It is not suitable for pouched, wrapped, hollow or porous loads — the SES 113B vacuum model is required for those load types. Eschmann recommends commissioning and annual servicing by an EschmannCare-trained engineer. PSSR 2000 certification may be required before clinical use — please confirm with your local engineer.

Information on this page is provided for guidance and does not replace advice from a qualified clinician. Always read the manufacturer's instructions before use, and check that a device is suitable for the patient and the prescribed therapy.