Philips M3001A & M3012A Patient Monitor Module for ECG, Resp, SpO2
Philips Multi-Measurement Patient Monitor Module
The Philips M3001A and M3012A are multi-measurement patient monitor modules designed to acquire ECG, respiration, SpO2, non-invasive blood pressure, temperature and pressure parameters within a compatible Philips monitoring system. These pre-owned modules are available in several variants, including M3000A, M3012A, M3001A, M3014A and M3015A, selectable from the options on this page.
What is Included
| Item | Detail | Condition |
|---|---|---|
| Multi-measurement module | Selected variant as chosen from the available options: M3000A, M3012A, M3001A, M3014A or M3015A | USED |
What is Not Included
| Item | Detail | Status |
|---|---|---|
| ECG cables | Patient cables and lead sets are not supplied with the module | SOLD SEPARATELY |
| SpO2 sensors | Single-use or reusable SpO2 probes are not included | SOLD SEPARATELY |
| NBP cuffs | Non-invasive blood pressure cuffs are not included | SOLD SEPARATELY |
| Temperature probes | Temperature consumables are not included | SOLD SEPARATELY |
| Host monitor | A compatible Philips patient monitor such as the MP30, MP50 or MP70 is required for the module to function | SOLD SEPARATELY |
Checked Before Dispatch
Each module is cleaned and inspected before dispatch. In-house workshop checks include visual inspection, connector condition and basic power-on function testing where the host monitor is available. These are in-house workshop checks. Damaged or non-working items are not dispatched. A full engineer service and calibration is not included unless this listing states the unit has been serviced. Planned maintenance and periodic electrical safety testing remain with the operating organisation.
This item may require service and calibration before clinical use. Confirm with your clinical engineering or medical devices department before deploying in a clinical environment.
Compatibility
These modules are designed for use with compatible Philips patient monitors. The store tags confirm compatibility with the Philips MP30, MP50 and MP70. Compatibility with other Philips monitors is not confirmed here. Check your host monitor model before ordering. If you are uncertain, ask before ordering.
Parameters and Variants
The available options cover a range of measurement combinations. The exact parameter set depends on the variant selected. The variants available on this page are listed below for reference.
| Option Code | Notes |
|---|---|
| M3000A | Product code held in the store record. Exact parameter configuration: check before ordering. |
| M3001A | Multi-measurement module variant |
| M3012A | Multi-measurement module variant |
| M3014A | Multi-measurement module variant |
| M3015A | Multi-measurement module variant |
If you require a specific parameter set or firmware version, state this when ordering or ask before ordering to confirm suitability.
Consumables and Accessories
Cables, sensors, cuffs and probes used with these modules are single-use or limited-reuse consumables. They are sold separately and are not included. The operating organisation is responsible for procuring and replacing consumables in line with their clinical protocol and the manufacturer instructions. Manufacturer instructions take precedence over any general guidance given here.
Photographs
Photographs form part of the description. Review the product images carefully before ordering. If the images do not match your requirements, ask before ordering.
