Edan SE-1200 Express ECG Recorder on Trolley

Name: Edan SE-1200 Express ECG Recorder on Trolley
Brand: Edan
SKU: EDSE1200
Price: 899.99 GBP
Availability: InStock
Rating: 4.8 (10 reviews)

EdanSKU EDSE1200

Hinta

£899⁹⁹

Price shown excludes VAT.

VAT relief available on this product

Eligible customers can claim VAT relief on this product at checkout.

Claim VAT relief I confirm I am chronically sick or disabled and these goods are for my personal or domestic use. I claim relief from VAT.

Määrä

Yksikköhinta£899.99

Yhteensä£899.99

Free UK mainland delivery on orders over £1,000

Haluatko mieluummin tarjouksen?

Pyydä tarjous

Tärkeimmät ominaisuudet

Merkki: Edan
Kategoria: Electrocardiogramme
SKU: EDSE1200
Vaihtoehdot: 2 vaihtoehtoa

Edan SE-1200 Express 12 Channel ECG Recorder on Trolley with ECG Leads, Pre-owned

The SE-1200 Express is Edan's 12 channel resting electrocardiograph, supplied here on its trolley and with its ECG leads. It acquires all twelve leads simultaneously onto an 8 inch colour display, samples at 16,000 Hz through a 24 bit converter, and prints on a built in thermal recorder. Patient connections are defibrillation proof CF type, so the leads stay on during a shock.

A resting ECG machine is bought on three things, and the headline channel count is not one of them. The first is signal quality, and the figure that matters in a working clinical area is common mode rejection: at least 140 dB with the mains filter in, which is the machine's ability to ignore the 50 Hz hum radiating from every other thing plugged in around it. Combined with a 24 bit converter resolving to 2.52 microvolts and a frequency response from 0.01 to 300 Hz, that is what produces a diagnostic trace rather than a wavy line that has to be repeated.

The second is what happens on a difficult patient, and this is where the filter set earns its keep. Mains filtering at 50 or 60 Hz deals with the environment. The muscle filter at 25, 35 or 45 Hz deals with a patient who is shivering, restless or in pain. The drift filter, selectable from 0.01 up to 0.67 Hz, deals with a wandering baseline from breathing or movement. Sensitivity runs from 1.25 to 20 mm per millivolt with automatic gain control available, and paper speed from 5 to 50 mm per second, so a small complex can be opened up and a fast rhythm spread out.

The third is whether the report leaves the machine. This one outputs as PDF, XML, DICOM and SCP, over Wi-Fi, Ethernet or serial, and speaks DICOM Worklist and Storage, HL7 and GDT, so the trace reaches the patient record rather than living on paper in a drawer. On the trolley with its internal battery it runs a ward round without finding a socket: the larger pack is rated at 2.5 hours of printing or around 450 reports. Supplied pre-owned with the trolley and the ECG leads.

References

Brand	Edan
Model	SE-1200 Express
Product number	300121.0
Manufacturer item number	83.61.460016
EAN	6944413857438
Device type	12 channel resting electrocardiograph
Supplied on	Trolley, model confirmed before dispatch
ECG leads	Supplied
Lower specified model in the range	SE-1200 Express Basic, a separate build
Condition	Pre-owned

Features

All twelve leads acquired simultaneously.
Common mode rejection of at least 140 dB with the mains filter in, and at least 123 dB without it.
Sampling at 16,000 Hz through a 24 bit converter resolving to 2.52 microvolts.
Frequency response from 0.01 to 300 Hz, with a time constant of at least 3.2 seconds.
Input impedance of at least 100 megohm at 10 Hz.
Mains filter at 50 or 60 Hz, for a clinical area full of other equipment.
Muscle filter at 25, 35 or 45 Hz, for a shivering or restless patient.
Baseline drift filter selectable from 0.01 to 0.67 Hz.
Low pass filter at 75, 100, 150, 270 or 300 Hz.
Sensitivity from 1.25 to 20 mm per millivolt, with a split 10 over 5 setting and automatic gain control.
Paper speed from 5 to 50 mm per second.
Built in thermal dot matrix recorder taking 210 by 295 mm folded paper.
Output as PDF, XML, DICOM and SCP.
Wi-Fi, Ethernet and serial connection, with DICOM Worklist and Storage, HL7 and GDT.
Internal lithium ion battery, up to around 450 reports on the larger pack.
Defibrillation proof CF type patient connections, so leads stay on during a shock.
8 inch colour display at 800 by 600.
Mobile on its trolley, with the ECG leads supplied.

Points to note before ordering

Two builds share this model name. Edan supply an SE-1200 Express and a lower specified SE-1200 Express Basic, and the touch screen is an option rather than standard across the range. Elarix Medical confirms from the unit which build this is, whether the screen is a touch screen, and which battery pack is fitted, before dispatch.
Electrodes and paper are the running cost, not the leads. The patient cable is supplied, but disposable electrodes, reusable limb clamps and chest bulbs, and thermal recorder paper are consumables ordered as ongoing stock. Elarix Medical confirms what accompanies this unit and quotes a starting set.
Interpretation and memory capacity read from the unit. Measurement and interpretation are configurable options on this platform and the stored report capacity depends on the build, so neither is published here. Both are read from the unit and stated in writing before dispatch rather than taken from a brochure.
Battery condition on a pre-owned recorder. The internal lithium pack is the wear part, and a trolley mounted ECG that will not run off its battery loses the reason it is on a trolley. Elarix Medical confirms the pack charges and holds, and quotes a fresh one where the fitted pack has aged.
Pre-owned condition and commissioning. Marks consistent with clinical use. To be decontaminated to local policy, electrically safety tested, and function checked with a patient simulator so that lead integrity, gain and paper speed are verified, before clinical use. Elarix Medical photographs the actual unit on request.

Tekniset erittelyt

Brand: Edan
Model: SE-1200 Express
Product number: 300121.0
Manufacturer item number: 83.61.460016
EAN: 6944413857438
Condition: Pre-owned
Device type: 12 channel resting electrocardiograph
Lead configuration: 12 standard leads, acquired simultaneously
Display: 8 inch colour, 800 by 600
Touch screen: An option on this range, confirmed from the unit before dispatch
Sampling rate: 16,000 Hz
Converter: 24 bit, 2.52 microvolts per least significant bit
Frequency response: 0.01 to 300 Hz at minus 3 dB
Time constant: At least 3.2 seconds
Input impedance: At least 100 megohm at 10 Hz
Input voltage range: No more than plus or minus 5 mV peak to peak
Input circuit current: No more than 0.01 microamp
Common mode rejection, mains filter on: At least 140 dB
Common mode rejection, mains filter off: At least 123 dB
Calibration voltage: 1 mV, plus or minus 2 per cent
Mains filter: 50 or 60 Hz
Baseline drift filter: 0.01, 0.05, 0.15, 0.25, 0.32, 0.5 and 0.67 Hz
Muscle filter: Off, 25, 35 or 45 Hz
Low pass filter: 75, 100, 150, 270 or 300 Hz
Sensitivity: 1.25, 2.5, 5, 10 and 20 mm per millivolt, 10 over 5, and automatic gain control
Paper speed: 5, 6.25, 10, 12.5, 25 and 50 mm per second
Recorder: Thermal dot matrix
Folded paper, standard: 210 by 295 mm, 100 pages
Print density: 8 dots per mm in amplitude, 40 dots per mm in time at 25 mm per second
External printing: Supported on specified laser printers
Report formats: PDF, XML, DICOM and SCP
Connectivity: Wi-Fi, Ethernet and serial
Hospital system interfaces: DICOM Worklist and Storage, HL7 and GDT
Interpretation and measurement: Configurable on this platform, confirmed from the unit before dispatch
Stored report capacity: Confirmed from the unit before dispatch
Battery: Internal lithium ion, 14.8 V
Battery options: 2500 mAh giving about 1.5 hours of printing or 300 reports; 5000 mAh giving about 2.5 hours or 450 reports
Charge time: About 3 hours for the smaller pack, 6 hours for the larger
Mains supply: 100 to 240 V, 50 or 60 Hz, United Kingdom lead
Dimensions of the recorder: 420 by 330 by 120 mm
Weight of the recorder: 5 kg, without paper and battery
Safety classification: Class I with internal power supply, CF type applied parts, defibrillation proof
Applied standards: IEC 60601-1, IEC 60601-1-2 and IEC 60601-2-25
Trolley: Supplied, model confirmed before dispatch
Cleaning: Surface decontamination to local policy, no immersion of the recorder or leads
Commissioning: Electrical safety test and function check with a patient simulator