Chat disponibil 24/7
Chat disponibil 24/7
Coșul tău este gol
A well-stocked CPAP accessory kit keeps your therapy setup clean, comfortable and running smoothly night after night. This collection brings together a carefully chosen range of replacement parts and comfort upgrades, including cushions, headgear, filters, hose holders, strap covers and more, so you can find exactly what you need in one place.
A fresh cushion is one of the most effective ways to restore a proper mask seal. This collection includes options for a wide range of popular masks:
Properly fitted headgear helps maintain consistent pressure and reduces mask leaks. Choose from:
Tidy tube routing can reduce tangles, noise and accidental disconnections during the night:
Clean air delivery is an important part of any CPAP setup. The Universal In-Line Bacteria Filter for CPAP and BiPAP Machines fits between the hose and mask to help reduce airborne particles entering the circuit.
Skin irritation and pressure marks from straps and cushions are common concerns. These accessories are designed to help reduce discomfort:
Suport pentru tubul CPAP – stativ cu înălțime reglabilă, anti-încâlcire Suportul pentru tubul CPAP este un accesoriu de susținere reglabil și stabi...
Vedeți toate detaliileHusă pentru tubul CPAP – moale, izolantă și anticondens Husa pentru tubul CPAP aduce confort, izolare și protecție sistemului dumneavoastră CPAP sa...
Vedeți toate detaliileCârlig pentru mască și suport de tub CPAP – depozitare sigură și ordonată Acest cârlig pentru mască și suport de tub CPAP este o soluție practică ș...
Vedeți toate detaliilePernă de schimb AirTouch F20 Confort ridicat cu perna AirTouch F20 Perna AirTouch F20 este concepută pentru a oferi un confort ridicat în timpul te...
Vedeți toate detaliilePernă ResMed AirFit F40 – pernă facială AdaptiSeal originală Perna ResMed AirFit F40 este o pernă facială AdaptiSeal originală, concepută pentru...
Vedeți toate detaliileCot rotativ Alvera AirLink 360 pentru măștile AirFit F20, AirTouch F20 și AirFit F30 Alvera AirLink 360 este un conector cot compatibil pentru m...
Vedeți toate detaliileAvantajele pernei AirFit F20 O etanșare bună Perna AirFit F20 este concepută pentru o potrivire bună a măștii CPAP. Datorită formei sale și materia...
Vedeți toate detaliileHusă pentru masca CPAP – set de 6 huse de confort pentru masca CPAP, cu perne faciale Produsul Husă pentru masca CPAP (set de 6 buc.) oferă mai mul...
Vedeți toate detaliilePernă nazală ResMed AirFit N30i Perna nazală ResMed AirFit N30i este garnitura din silicon care se atașează la cadrul măștii CPAP nazale Air...
Vedeți toate detaliileHuse pentru bentițe CPAP – accesorii moi, respirabile și reutilizabile pentru confort Aceste huse pentru bentițe CPAP oferă confort, respirabilitat...
Vedeți toate detaliileHuse pentru curele CPAP – protecții moi pentru susținerea delicată a măștii (set de 4) Produsul Huse pentru curele CPAP este conceput să aducă conf...
Vedeți toate detaliileBentiță și pernuță de gât CPAP – pernuță universală pentru confort Produsul Bentiță și pernuță de gât CPAP este un accesoriu universal pentru confo...
Vedeți toate detaliilePernuță ResMed AirTouch N20 – pernuță nazală de schimb din spumă cu memorie Pernuța ResMed AirTouch N20 este o pernuță nazală de schimb concepută ...
Vedeți toate detaliilePernă ResMed AirFit N20 – pernă nazală din silicon de schimb Perna ResMed AirFit N20 este o pernă nazală de schimb concepută pentru sistemul de ma...
Vedeți toate detaliileBentiță de protecție nazală și facială CPAP – confort ergonomic și protecție Produsul Bentiță de protecție nazală și facială CPAP este un accesoriu...
Vedeți toate detaliileHam ResMed AirFit F40 cu cleme magnetice Hamul ResMed AirFit F40 este un ham de schimb conceput pentru masca CPAP facială completă AirFit F40. Perm...
Vedeți toate detaliilePerne nazale ResMed AirFit P10 Pernele nazale ResMed AirFit P10 sunt o piesă originală concepută pentru masca CPAP cu perne nazale ResMed AirFit...
Vedeți toate detaliilePernă cu perne nazale AirFit P10 pentru o terapie CPAP confortabilă Perna cu perne nazale AirFit P10 este un accesoriu de schimb pentru masca CPAP,...
Vedeți toate detaliilePernă pentru masca CPAP facială Fisher & Paykel Vitera Perna facială Fisher & Paykel Vitera este o piesă originală concepută exclusiv pentr...
Vedeți toate detaliilePernă de schimb AirFit N20 Această pernă de schimb AirFit N20 este o componentă consumabilă nouă a interfeței, concepută pentru a reface etanșarea ...
Vedeți toate detaliileHam de schimb AirFit F40 pentru ResMed AirFit F40, cu cleme magnetice Acest ham de schimb AirFit F40 este conceput special pentru masca facială Res...
Vedeți toate detaliileHam Alvera AirStrap pentru măștile faciale AirFit F20 și AirTouch F20 Hamul Alvera AirStrap este un ham de rezervă compatibil pentru măștile fac...
Vedeți toate detaliileCameră de apă pentru umidificatorul aparatului CPAP Fisher & Paykel SleepStyle Camera de apă Fisher & Paykel SleepStyle este o cameră de um...
Vedeți toate detaliileCleme magnetice Alvera AirStrap pentru harnașament, 4 bucăți, pentru măștile AirFit N20, F20, F30 și AirTouch F20, N20 Clemele magnetice Alvera ...
Vedeți toate detaliileGenuine replacement water chambers for ResMed, Philips and Fisher & Paykel humidifiers, keeping your therapy comfortable and moisture-balanced every night.
Standard, slim-line and heated CPAP tubing compatible with all major machines. Replace worn or kinked tubing to maintain consistent airflow and pressure delivery.
Disposable and reusable filters protect your machine's motor and ensure the air you breathe is clean. Replace regularly for optimal performance and longevity.
Eligible patients with a qualifying chronic illness or disability can claim VAT Relief on CPAP accessories, saving 20% at checkout.
CPAP Machine Accessories
CPAP tubing should be replaced every 3 to 6 months under normal use. Over time, tubing can develop micro-cracks, become stiff or discoloured, and harbour moisture or residue that is difficult to remove even with regular cleaning.
Signs that your tubing needs replacing include visible discolouration, a persistent musty odour, cracks or splits along the length, or a reduction in therapy pressure caused by small undetected leaks.
Standard 22mm tubing is compatible with most CPAP, APAP and BiPAP machines. If your machine uses heated tubing such as the ResMed ClimateLineAir or Philips HeatedTube, ensure you purchase the correct heated tube for your specific model.
Water chambers should be replaced every 6 to 12 months. Over time, the plastic can become cloudy, develop mineral deposits from water, or show fine scratches that trap bacteria and are impossible to clean effectively.
Always use distilled or sterile water in your humidifier chamber. Tap water contains minerals that accelerate scaling and deposit build-up, shortening the life of the chamber and potentially harming the heating plate.
If you notice white or grey deposits inside the chamber, persistent cloudiness, or cracks in the plastic, replace the chamber immediately rather than continuing to use it.
Distilled water is the only recommended type for use in CPAP humidifier chambers. Distilled water has had its mineral content removed, which prevents limescale build-up on the heating plate and inside the chamber.
Tap water, even in soft water areas, contains dissolved minerals that will gradually coat the heating element and chamber walls, reducing humidifier efficiency and shortening the component's life.
Bottled mineral water should also be avoided as it contains minerals by definition. In an emergency while travelling, cooled boiled water is an acceptable short-term substitute, but distilled water should be resumed as soon as possible.
Most CPAP machines use two types of filter:
Disposable fine filters should be replaced every 2 to 4 weeks. These thin white filters capture dust, pollen and fine particulates. They cannot be washed and must be discarded when discoloured.
Reusable foam filters should be rinsed with water weekly, allowed to dry completely, and replaced every 3 to 6 months or when they show signs of wear, tearing or persistent discolouration.
If you live in a dusty environment, have pets, or suffer from allergies, replace filters more frequently. A clogged filter restricts airflow, causes the machine to work harder and can reduce therapy effectiveness.
Always check your specific machine's user manual for the exact filter types and replacement schedule recommended by the manufacturer.
Standard tubing is unheated and works with all CPAP machines. It is the most widely used type and is suitable for most patients. The main limitation is that moisture from the humidifier can condense inside the tube if there is a temperature difference between the machine and the room, a phenomenon known as rainout.
Heated tubing contains a fine heating element that warms the air as it travels from the machine to the mask, preventing condensation and rainout. It significantly improves comfort for patients who experience moisture in the tube or who use high humidification settings.
Heated tubes are proprietary and model-specific. The ResMed ClimateLineAir, Philips HeatedTube and Fisher & Paykel ThermoSmart tube are not interchangeable. Ensure you purchase the heated tube designed for your specific machine model.
Daily: empty any remaining water from the chamber each morning and leave it open to air dry. Do not leave standing water in the chamber between uses.
Weekly: disassemble the water chamber and wash it in warm water with a small amount of mild, fragrance-free dish soap. Rinse thoroughly and allow to air dry completely before refilling.
For tubing, hang it vertically after washing to allow water to drain and dry from the inside. A tube cleaning brush is useful for removing any residue from the inner surface.
Avoid the dishwasher, bleach, alcohol-based cleaners or ozone cleaning devices for water chambers and tubing, as these can damage seals, degrade plastic and leave harmful residues.
Standard 22mm tubing is universal and compatible with virtually all CPAP, APAP and BiPAP machines regardless of manufacturer. Standard filters with the same dimensions are also broadly interchangeable, though it is always best to use the manufacturer's recommended filter for your specific model.
Water chambers are not interchangeable between brands or models. Each humidifier tub is designed to clip, slide or lock into a specific machine housing. Always check the model compatibility before ordering a replacement chamber.
Heated tubing is brand and model specific and cannot be used across different manufacturers. If you are uncertain about compatibility, contact our team and we will confirm the correct part for your machine.
A complete CPAP setup requires the following essential accessories:
CPAP tubing: connects your machine to your mask. Standard 22mm tubing is supplied with most machines, but a spare is recommended.
Water chamber: if your machine has an integrated humidifier, a water chamber will either be included or available separately. Fill it with distilled water before each use.
Filters: ensure your machine has a clean filter installed before first use. Check whether your model uses disposable, reusable or both types.
Mask: select the appropriate mask type and size for your breathing pattern and facial anatomy.
Optional but recommended accessories include a CPAP travel bag, a DC power cable for travel, mask wipes for daily cleaning and a tube cleaning brush for weekly maintenance.
Yes. CPAP accessories including tubing, water chambers, filters and cleaning supplies are eligible for VAT Relief under Group 12 of Schedule 8 of the Value Added Tax Act 1994, provided they are purchased by an individual with a qualifying chronic illness or disability for personal use.
To claim VAT Relief, tick the declaration at checkout confirming your eligibility. This reduces the purchase price by 20%. No GP letter or formal prescription is required, but the declaration must be truthful. Making a false declaration is a criminal offence under UK law.
10%OFF
your first order of CPAP supplies
Welcome to SelfiMed UK
Join our email list for CPAP and home-care tips, new arrivals and offers. Your code appears straight away.
By signing up you agree to receive marketing emails from SelfiMed UK. Unsubscribe at any time. One use per customer, first order only. Valid on CPAP masks, cushions, tubing, filters and other supplies; not on machines or medical equipment.
You're in
We've also added it to your basket, so it applies at checkout automatically.
One use per customer, first order only. Valid on supplies, not on machines or equipment.