Chat disponibil 24/7
Chat disponibil 24/7
Coșul tău este gol
SelfiMed UK supplies a comprehensive range of CPAP machine accessories designed to support effective and comfortable sleep apnoea therapy. The collection includes CPAP masks, humidifiers, replacement filters, tubing and cleaning supplies compatible with leading CPAP systems. These accessories help maintain consistent airflow, improve comfort during treatment and ensure hygienic operation of CPAP equipment. Suitable for both new and experienced users, they support reliable therapy performance in home-care settings. Fast UK delivery is available across the full range at competitive prices.
5.0 / 5.0
2 Recenzii
Rezervor ResMed S10 HumidAir Standard, cameră de apă originală (Ref. 37299) Rezervorul ResMed S10 HumidAir Standard (Ref. 37299) este o cameră d...
Vedeți toate detaliileTub încălzit ResMed ClimateLineAir 10 (Ref. 37298) ResMed ClimateLineAir 10 este un tub respirator încălzit conceput exclusiv pentru aparatele R...
Vedeți toate detaliile3.0 / 5.0
1 Recenzie
Filtru ALVERA PureFlow 10 compatibil cu aparatele S9 & AirSense 10 Alvera PureFlow 10 este un filtru de aer de unică folosință, tăiat cu pre...
Vedeți toate detaliile4.67 / 5.0
3 Recenzii
Umidificator încălzit ResMed S9 H5i pentru CPAP – fără cameră de apă Umidificatorul încălzit ResMed H5i este conceput pentru utilizarea cu apara...
Vedeți toate detaliileDispozitiv de curățare și igienizare CPAP – dezinfecție portabilă cu ozon pentru echipamente CPAP și BiPAP Acest dispozitiv de curățare și igieniza...
Vedeți toate detaliileConector de ieșire a aerului ResMed AirSense 10 (folosit) Conectorul de ieșire a aerului ResMed AirSense 10 este o piesă originală care se monte...
Vedeți toate detaliileConector de mască ResMed AirMini pentru măștile AirFit și AirTouch Conectorul de mască ResMed AirMini este un conector dedicat care adapteaz...
Vedeți toate detaliileResMed HumidAir 11 – rezervor de apă standard pentru aparatul CPAP AirSense 11 Rezervorul de apă standard ResMed HumidAir 11 este o cameră de umid...
Vedeți toate detaliileFurtun CPAP ResMed SlimLine 15 mm 1.83 m cu cot pentru furtun Air10, REF 36810 și 37394 Furtunul SlimLine este furtunul ResMed cu diametru îngus...
Vedeți toate detaliile5.0 / 5.0
1 Recenzie
Șervețele ResMed pentru măști CPAP — cutie cu 62 de bucăți (Ref. 61918) Șervețelele ResMed pentru măști CPAP (Ref. 61918) oferă o soluție rap...
Vedeți toate detaliilePachet de consumabile AirSense 11 Pachetul de consumabile AirSense 11 este conceput pentru a menține terapia CPAP constantă și fiabilă, grupând ...
Vedeți toate detaliileFiltru Alvera PureFlow 11 compatibil cu aparatele AirSense 11 Alvera PureFlow 11 este un filtru de aer de unică folosință, tăiat cu precizie și ...
Vedeți toate detaliile5.0 / 5.0
1 Recenzie
Tub încălzit Philips Respironics DreamStation (HT15) Tubul încălzit Philips Respironics DreamStation este conceput pentru un confort CPAP mai bun, ...
Vedeți toate detaliileTub încălzit ResMed ClimateLineAir 11 (Ref. 39102) ResMed ClimateLineAir 11 este un tub încălzit conceput exclusiv pentru aparatul ResMed AirSen...
Vedeți toate detaliilePachet de consumabile AirSense 10 Acest Pachet de consumabile AirSense 10 este conceput pentru a menține terapia CPAP constantă și fiabilă, grupân...
Vedeți toate detaliileAdaptor pentru mască Alvera AirLink Mini – conectați orice mască standard de 22 mm la un AirMini Adaptorul pentru mască Alvera AirLink Mini perm...
Vedeți toate detaliile
Economisiți până la 0%
Economisiți %
Filtru ALVERA PureFlow Mini compatibil cu dispozitivele AirMini
Filtru ALVERA PureFlow AirMini compatibil cu dispozitivele AirMini Alvera PureFlow AirMini este un filtru de aer de unică folosință, tăiat cu pr...
Vedeți toate detaliileDispozitiv de curățare și igienizare CPAP – dezinfecție portabilă cu ozon pentru echipamente CPAP și BiPAP Dispozitivul de curățare și igienizare C...
Vedeți toate detaliileCot rotativ Alvera AirLink 360 pentru măștile AirFit F20, AirTouch F20 și AirFit F30 Alvera AirLink 360 este un conector cot compatibil pentru m...
Vedeți toate detaliileCapac filtru ResMed AirSense 10 – piesă de schimb originală Capacul de filtru ResMed AirSense 10 este o componentă de schimb originală, concepută p...
Vedeți toate detaliile5.0 / 5.0
1 Recenzie
Furtun CPAP subțire Philips Respironics DreamStation Slim Style 15 mm — Ref. PR15 Furtunul Philips Respironics PR15 este tubul CPAP original,...
Vedeți toate detaliileCot ResMed QuietAir pentru măștile CPAP AirFit F20 și F30 Cotul ResMed QuietAir este un cot cu articulație rotativă original ResMed pentru măștile ...
Vedeți toate detaliile5.0 / 5.0
1 Recenzie
Suport de protecție pentru aparat CPAP Produsul Suport de protecție pentru aparat CPAP este un covoraș antiderapant și impermeabil, conceput pentru...
Vedeți toate detaliile5.0 / 5.0
1 Recenzie
Husă de transport rigidă ResMed AirMini Această husă de transport AirMini este concepută pentru a proteja aparatul CPAP de călătorie ResMed AirMini...
Vedeți toate detaliileGenuine replacement water chambers for ResMed, Philips and Fisher & Paykel humidifiers, keeping your therapy comfortable and moisture-balanced every night.
Standard, slim-line and heated CPAP tubing compatible with all major machines. Replace worn or kinked tubing to maintain consistent airflow and pressure delivery.
Disposable and reusable filters protect your machine's motor and ensure the air you breathe is clean. Replace regularly for optimal performance and longevity.
Eligible patients with a qualifying chronic illness or disability can claim VAT Relief on CPAP accessories, saving 20% at checkout.
CPAP Machine Accessories
CPAP tubing should be replaced every 3 to 6 months under normal use. Over time, tubing can develop micro-cracks, become stiff or discoloured, and harbour moisture or residue that is difficult to remove even with regular cleaning.
Signs that your tubing needs replacing include visible discolouration, a persistent musty odour, cracks or splits along the length, or a reduction in therapy pressure caused by small undetected leaks.
Standard 22mm tubing is compatible with most CPAP, APAP and BiPAP machines. If your machine uses heated tubing such as the ResMed ClimateLineAir or Philips HeatedTube, ensure you purchase the correct heated tube for your specific model.
Water chambers should be replaced every 6 to 12 months. Over time, the plastic can become cloudy, develop mineral deposits from water, or show fine scratches that trap bacteria and are impossible to clean effectively.
Always use distilled or sterile water in your humidifier chamber. Tap water contains minerals that accelerate scaling and deposit build-up, shortening the life of the chamber and potentially harming the heating plate.
If you notice white or grey deposits inside the chamber, persistent cloudiness, or cracks in the plastic, replace the chamber immediately rather than continuing to use it.
Distilled water is the only recommended type for use in CPAP humidifier chambers. Distilled water has had its mineral content removed, which prevents limescale build-up on the heating plate and inside the chamber.
Tap water, even in soft water areas, contains dissolved minerals that will gradually coat the heating element and chamber walls, reducing humidifier efficiency and shortening the component's life.
Bottled mineral water should also be avoided as it contains minerals by definition. In an emergency while travelling, cooled boiled water is an acceptable short-term substitute, but distilled water should be resumed as soon as possible.
Most CPAP machines use two types of filter:
Disposable fine filters should be replaced every 2 to 4 weeks. These thin white filters capture dust, pollen and fine particulates. They cannot be washed and must be discarded when discoloured.
Reusable foam filters should be rinsed with water weekly, allowed to dry completely, and replaced every 3 to 6 months or when they show signs of wear, tearing or persistent discolouration.
If you live in a dusty environment, have pets, or suffer from allergies, replace filters more frequently. A clogged filter restricts airflow, causes the machine to work harder and can reduce therapy effectiveness.
Always check your specific machine's user manual for the exact filter types and replacement schedule recommended by the manufacturer.
Standard tubing is unheated and works with all CPAP machines. It is the most widely used type and is suitable for most patients. The main limitation is that moisture from the humidifier can condense inside the tube if there is a temperature difference between the machine and the room, a phenomenon known as rainout.
Heated tubing contains a fine heating element that warms the air as it travels from the machine to the mask, preventing condensation and rainout. It significantly improves comfort for patients who experience moisture in the tube or who use high humidification settings.
Heated tubes are proprietary and model-specific. The ResMed ClimateLineAir, Philips HeatedTube and Fisher & Paykel ThermoSmart tube are not interchangeable. Ensure you purchase the heated tube designed for your specific machine model.
Daily: empty any remaining water from the chamber each morning and leave it open to air dry. Do not leave standing water in the chamber between uses.
Weekly: disassemble the water chamber and wash it in warm water with a small amount of mild, fragrance-free dish soap. Rinse thoroughly and allow to air dry completely before refilling.
For tubing, hang it vertically after washing to allow water to drain and dry from the inside. A tube cleaning brush is useful for removing any residue from the inner surface.
Avoid the dishwasher, bleach, alcohol-based cleaners or ozone cleaning devices for water chambers and tubing, as these can damage seals, degrade plastic and leave harmful residues.
Standard 22mm tubing is universal and compatible with virtually all CPAP, APAP and BiPAP machines regardless of manufacturer. Standard filters with the same dimensions are also broadly interchangeable, though it is always best to use the manufacturer's recommended filter for your specific model.
Water chambers are not interchangeable between brands or models. Each humidifier tub is designed to clip, slide or lock into a specific machine housing. Always check the model compatibility before ordering a replacement chamber.
Heated tubing is brand and model specific and cannot be used across different manufacturers. If you are uncertain about compatibility, contact our team and we will confirm the correct part for your machine.
A complete CPAP setup requires the following essential accessories:
CPAP tubing: connects your machine to your mask. Standard 22mm tubing is supplied with most machines, but a spare is recommended.
Water chamber: if your machine has an integrated humidifier, a water chamber will either be included or available separately. Fill it with distilled water before each use.
Filters: ensure your machine has a clean filter installed before first use. Check whether your model uses disposable, reusable or both types.
Mask: select the appropriate mask type and size for your breathing pattern and facial anatomy.
Optional but recommended accessories include a CPAP travel bag, a DC power cable for travel, mask wipes for daily cleaning and a tube cleaning brush for weekly maintenance.
Yes. CPAP accessories including tubing, water chambers, filters and cleaning supplies are eligible for VAT Relief under Group 12 of Schedule 8 of the Value Added Tax Act 1994, provided they are purchased by an individual with a qualifying chronic illness or disability for personal use.
To claim VAT Relief, tick the declaration at checkout confirming your eligibility. This reduces the purchase price by 20%. No GP letter or formal prescription is required, but the declaration must be truthful. Making a false declaration is a criminal offence under UK law.