Chat disponible 24h/24, 7j/7
Chat disponible 24h/24, 7j/7
Votre panier est vide
SelfiMed UK fournit une gamme complète d'accessoires pour appareils CPAP conçus pour soutenir une thérapie efficace et confortable de l'apnée du sommeil. La collection comprend des masques CPAP, des humidificateurs, des filtres de rechange, des tuyaux et des produits de nettoyage compatibles avec les principaux systèmes CPAP. Ces accessoires aident à maintenir un flux d'air constant, à améliorer le confort pendant le traitement et à assurer le fonctionnement hygiénique de l'équipement CPAP. Adaptés aux utilisateurs novices et expérimentés, ils garantissent des performances thérapeutiques fiables dans les environnements de soins à domicile. Une livraison rapide au Royaume-Uni est disponible sur l'ensemble de la gamme à des prix compétitifs.
Réservoir ResMed S10 HumidAir Standard, réservoir d’eau d’origine (réf. 37299) Le réservoir ResMed S10 HumidAir Standard (réf. 37299) est un rés...
Afficher tous les détailsFiltre Alvera PureFlow 10 compatible avec les appareils S9 et AirSense 10 L'Alvera PureFlow 10 est un filtre à air jetable découpé avec précisio...
Afficher tous les détailsTuyau chauffant ResMed ClimateLineAir 10 (Réf. 37298) Le ResMed ClimateLineAir 10 est un tuyau respiratoire chauffant conçu exclusivement pour l...
Afficher tous les détailsHumidificateur chauffant CPAP ResMed S9 H5i - Sans réservoir d'eau L'humidificateur chauffant ResMed H5i est conçu pour être utilisé avec les ap...
Afficher tous les détailsSacoche ResMed pour appareils PPC/CPAP AirSense 10 et Lumis La sacoche PPC ResMed est une solution pratique pour transporter en toute sécurité vos ...
Afficher tous les détailsNettoyeur et désinfectant CPAP – Désinfection portable à l'ozone pour équipements CPAP et BiPAP Le nettoyeur et désinfectant CPAP offre une solutio...
Afficher tous les détailsSortie d'air ResMed AirSense 10 (d'occasion) La sortie d'air ResMed AirSense 10 est un connecteur d'origine qui se fixe à l'arrière des appareil...
Afficher tous les détailsResMed HumidAir 11 – Réservoir d’eau standard pour appareil CPAP AirSense 11 Le ResMed HumidAir 11 Standard est un réservoir d’eau d’origine, une ...
Afficher tous les détailsResMed AirMini – Connecteur de masque pour masques AirFit et AirTouch Le connecteur de masque ResMed AirMini est un connecteur conçu spécifi...
Afficher tous les détailsTuyau CPAP ResMed SlimLine 15 mm 1.83 m avec coude de tuyau Air10, REF 36810 et 37394 Le tuyau SlimLine est le tuyau à diamètre réduit de ResMed...
Afficher tous les détailsLingettes ResMed pour masque PPC/CPAP — boîte de 62 lingettes (réf. 61918) Les lingettes ResMed pour masque PPC (réf. 61918) offrent une solu...
Afficher tous les détailsLot de consommables AirSense 11 Le lot de consommables AirSense 11 est conçu pour assurer la régularité et la fiabilité du traitement par PPC (C...
Afficher tous les détailsFiltre ALVERA PureFlow 11 compatible avec les appareils AirSense 11 L'Alvera PureFlow 11 est un filtre à air jetable découpé avec précision, con...
Afficher tous les détailsResMed ClimateLineAir 11 – Tubulure chauffante (Réf. 39102) La ResMed ClimateLineAir 11 est une tubulure chauffante conçue exclusivement pour l'...
Afficher tous les détailsPhilips Respironics DreamStation – Tubulure chauffante (HT15) La tubulure chauffante Philips Respironics DreamStation est conçue pour améliorer le ...
Afficher tous les détailsTuyau chauffant PPC Alvera ThermaAir 10 pour appareils de la série Air 10, REF 55110 L'Alvera ThermaAir 10 est un tuyau chauffant compatible avec ...
Afficher tous les détailsAdaptateur de masque Alvera AirLink Mini : raccordez un masque standard de 22 mm à un AirMini L'adaptateur de masque Alvera AirLink Mini permet ...
Afficher tous les détails
Économisez jusqu'à 0%
Économisez %
Filtre ALVERA PureFlow Mini compatible avec les appareils AirMini
Filtre ALVERA PureFlow AirMini compatible avec les appareils AirMini L'Alvera PureFlow AirMini est un filtre à air jetable découpé avec précisio...
Afficher tous les détailsCache-filtre ResMed AirSense 10 – pièce de rechange d'origine Le cache-filtre ResMed AirSense 10 est une pièce de rechange d'origine conçue pour pr...
Afficher tous les détailsNettoyeur et désinfecteur CPAP – Désinfection portable à l'ozone pour équipements CPAP & BiPAP Le nettoyeur et désinfecteur CPAP offre un moyen...
Afficher tous les détailsConnecteur Alvera AirLink Mini pour appareils PPC de voyage AirMini Le connecteur Alvera AirLink Mini est un connecteur compatible pour les appa...
Afficher tous les détailsCoude pivotant Alvera AirLink 360 pour masques AirFit F20, AirTouch F20 et AirFit F30 L'Alvera AirLink 360 est un coude de raccordement compatib...
Afficher tous les détailsHousse anti-poussière pour appareil CPAP La housse anti-poussière pour appareil CPAP est conçue pour protéger votre appareil de la poussière, des d...
Afficher tous les détailsTuyau PPC standard Alvera AirFlex, 19 mm L'Alvera AirFlex est un tuyau PPC standard de 19 mm conçu pour acheminer l'air thérapeutique de l'appar...
Afficher tous les détailsGenuine replacement water chambers for ResMed, Philips and Fisher & Paykel humidifiers, keeping your therapy comfortable and moisture-balanced every night.
Standard, slim-line and heated CPAP tubing compatible with all major machines. Replace worn or kinked tubing to maintain consistent airflow and pressure delivery.
Disposable and reusable filters protect your machine's motor and ensure the air you breathe is clean. Replace regularly for optimal performance and longevity.
Eligible patients with a qualifying chronic illness or disability can claim VAT Relief on CPAP accessories, saving 20% at checkout.
CPAP Machine Accessories
CPAP tubing should be replaced every 3 to 6 months under normal use. Over time, tubing can develop micro-cracks, become stiff or discoloured, and harbour moisture or residue that is difficult to remove even with regular cleaning.
Signs that your tubing needs replacing include visible discolouration, a persistent musty odour, cracks or splits along the length, or a reduction in therapy pressure caused by small undetected leaks.
Standard 22mm tubing is compatible with most CPAP, APAP and BiPAP machines. If your machine uses heated tubing such as the ResMed ClimateLineAir or Philips HeatedTube, ensure you purchase the correct heated tube for your specific model.
Water chambers should be replaced every 6 to 12 months. Over time, the plastic can become cloudy, develop mineral deposits from water, or show fine scratches that trap bacteria and are impossible to clean effectively.
Always use distilled or sterile water in your humidifier chamber. Tap water contains minerals that accelerate scaling and deposit build-up, shortening the life of the chamber and potentially harming the heating plate.
If you notice white or grey deposits inside the chamber, persistent cloudiness, or cracks in the plastic, replace the chamber immediately rather than continuing to use it.
Distilled water is the only recommended type for use in CPAP humidifier chambers. Distilled water has had its mineral content removed, which prevents limescale build-up on the heating plate and inside the chamber.
Tap water, even in soft water areas, contains dissolved minerals that will gradually coat the heating element and chamber walls, reducing humidifier efficiency and shortening the component's life.
Bottled mineral water should also be avoided as it contains minerals by definition. In an emergency while travelling, cooled boiled water is an acceptable short-term substitute, but distilled water should be resumed as soon as possible.
Most CPAP machines use two types of filter:
Disposable fine filters should be replaced every 2 to 4 weeks. These thin white filters capture dust, pollen and fine particulates. They cannot be washed and must be discarded when discoloured.
Reusable foam filters should be rinsed with water weekly, allowed to dry completely, and replaced every 3 to 6 months or when they show signs of wear, tearing or persistent discolouration.
If you live in a dusty environment, have pets, or suffer from allergies, replace filters more frequently. A clogged filter restricts airflow, causes the machine to work harder and can reduce therapy effectiveness.
Always check your specific machine's user manual for the exact filter types and replacement schedule recommended by the manufacturer.
Standard tubing is unheated and works with all CPAP machines. It is the most widely used type and is suitable for most patients. The main limitation is that moisture from the humidifier can condense inside the tube if there is a temperature difference between the machine and the room, a phenomenon known as rainout.
Heated tubing contains a fine heating element that warms the air as it travels from the machine to the mask, preventing condensation and rainout. It significantly improves comfort for patients who experience moisture in the tube or who use high humidification settings.
Heated tubes are proprietary and model-specific. The ResMed ClimateLineAir, Philips HeatedTube and Fisher & Paykel ThermoSmart tube are not interchangeable. Ensure you purchase the heated tube designed for your specific machine model.
Daily: empty any remaining water from the chamber each morning and leave it open to air dry. Do not leave standing water in the chamber between uses.
Weekly: disassemble the water chamber and wash it in warm water with a small amount of mild, fragrance-free dish soap. Rinse thoroughly and allow to air dry completely before refilling.
For tubing, hang it vertically after washing to allow water to drain and dry from the inside. A tube cleaning brush is useful for removing any residue from the inner surface.
Avoid the dishwasher, bleach, alcohol-based cleaners or ozone cleaning devices for water chambers and tubing, as these can damage seals, degrade plastic and leave harmful residues.
Standard 22mm tubing is universal and compatible with virtually all CPAP, APAP and BiPAP machines regardless of manufacturer. Standard filters with the same dimensions are also broadly interchangeable, though it is always best to use the manufacturer's recommended filter for your specific model.
Water chambers are not interchangeable between brands or models. Each humidifier tub is designed to clip, slide or lock into a specific machine housing. Always check the model compatibility before ordering a replacement chamber.
Heated tubing is brand and model specific and cannot be used across different manufacturers. If you are uncertain about compatibility, contact our team and we will confirm the correct part for your machine.
A complete CPAP setup requires the following essential accessories:
CPAP tubing: connects your machine to your mask. Standard 22mm tubing is supplied with most machines, but a spare is recommended.
Water chamber: if your machine has an integrated humidifier, a water chamber will either be included or available separately. Fill it with distilled water before each use.
Filters: ensure your machine has a clean filter installed before first use. Check whether your model uses disposable, reusable or both types.
Mask: select the appropriate mask type and size for your breathing pattern and facial anatomy.
Optional but recommended accessories include a CPAP travel bag, a DC power cable for travel, mask wipes for daily cleaning and a tube cleaning brush for weekly maintenance.
Yes. CPAP accessories including tubing, water chambers, filters and cleaning supplies are eligible for VAT Relief under Group 12 of Schedule 8 of the Value Added Tax Act 1994, provided they are purchased by an individual with a qualifying chronic illness or disability for personal use.
To claim VAT Relief, tick the declaration at checkout confirming your eligibility. This reduces the purchase price by 20%. No GP letter or formal prescription is required, but the declaration must be truthful. Making a false declaration is a criminal offence under UK law.