Salta il contenuto
VAT Relief available for eligible patients — save 20% on your order
Spedizione il giorno successivo per ordini effettuati entro le 13:00 dal lunedì al venerdì
Consegna in tutto il mondo con corrieri affidabili — tracciata e assicurata
Consegna gratuita nel Regno Unito oltre £300 · articoli voluminosi £1,000+
Arjo Sara 3000 Standing Aid with Battery and Controller Standing Aid SelfiMed UK

Arjo Sara 3000 Standing: How to Choose and What to Expect

The Arjo Sara 3000 Standing is a powered stand aid designed to support sit-to-stand transfers for patients who retain some weight-bearing ability. Choosing the right model and understanding what the equipment involves operationally is essential before purchase, whether for a clinical ward, a care home or a home-care setting.

What the Arjo Sara 3000 Standing Is and How It Works

Core function

The Sara 3000 Standing is a battery-powered active stand aid. It is not a full hoist. It is designed for patients who can bear weight through their legs with support, and it assists the transfer from a seated to a standing position using a powered mast and a sling or vest system.

The device includes a wheeled base, a powered lifting mast, a handlebar or support frame for the patient to hold, and a sling attachment point. Drive is provided by a rechargeable battery integrated into the unit.

Who it is intended for

The Sara 3000 Standing is intended for use by trained carers assisting patients with partial weight-bearing capacity. It is not suitable for patients who are fully dependent or who cannot follow instructions during a transfer. Clinical assessment by a qualified professional should determine suitability before the equipment is put into service.

How it differs from a passive hoist

Unlike a passive hoist, the Sara 3000 Standing requires active participation from the patient. The powered mast reduces the manual handling load on the carer during the standing phase, but the patient must be able to contribute to the movement. This distinction matters when selecting equipment for a specific patient or caseload.

Arjo Sara 3000 Standing Aid with Battery and Controller Standing Aid SelfiMed UK

Arjo Sara 3000 Standing Aid with Battery and Controller

£499.99

Buy nowView product

Key Specifications and Compatibility Points to Verify

Safe working load

The Sara 3000 Standing has a published safe working load. Before putting any stand aid into service, the safe working load of every component in the system must be confirmed, including the sling or vest. The lowest safe working load in the complete system governs. Do not exceed it.

Sling and vest compatibility

Slings and vests for the Sara 3000 Standing are sold separately and are single-use or patient-specific consumables in most protocols. The correct sling must be selected for the patient's size, weight and clinical need. Ask before ordering if compatibility with a specific sling reference is uncertain. Using an incompatible sling is a safety risk.

Battery and charger

The Sara 3000 Standing runs on an integrated rechargeable battery. Confirm that the charger is included with any pre-owned unit, as it may be sold separately or absent. A unit supplied without a charger is not ready for service. Battery condition on pre-owned units should be stated explicitly; ask if it is not.

Regulatory and Safety Obligations

LOLER 1998

In the United Kingdom, the Sara 3000 Standing is classified as lifting equipment under the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER). A thorough examination by a competent person is required at least every six months. This examination must be arranged by the operating organisation. It is not carried out by the supplier at point of sale.

PUWER 1998

The Provision and Use of Work Equipment Regulations 1998 (PUWER) also apply. The operating organisation is responsible for ensuring the equipment is maintained in a safe condition, that operators are trained, and that a maintenance protocol is in place.

Decontamination before reuse

Pre-owned units must be decontaminated in accordance with the operating organisation's infection control protocol before use on any patient. Confirmation that a unit has been cleaned and inspected before dispatch does not substitute for the receiving organisation's own decontamination process.

What to Check Before Ordering a Pre-Owned Unit

Condition and history

  • Hours of use or age, state this if known, or ask the supplier to confirm it.
  • Battery condition, a degraded battery may not support a full working day and may need replacement.
  • Cosmetic state, photographs form part of the description on any pre-owned listing and should be reviewed carefully.
  • Charger included or not, confirm before ordering to avoid operational delay.
  • Sling loops and attachment points, inspect for wear, deformation or damage.
  • Last LOLER examination date, request the certificate if available.
  • Function tested, confirm the mast raises and lowers through its full range under load.

What is and is not included

A pre-owned Sara 3000 Standing may be offered as the base unit only. Slings, vests, chargers and accessories are commonly sold separately. Confirm the exact contents of the sale before ordering. Receiving a unit without a charger or compatible sling means it cannot be used immediately.

New versus pre-owned: practical differences

A new unit comes with a full manufacturer warranty, original packaging and a known service history of zero. A pre-owned unit is typically lower in cost but requires the buyer to verify condition, arrange LOLER examination and confirm battery state. Neither condition removes the operating organisation's obligation to carry out commissioning and periodic examination.

Summary: Choosing and Using the Arjo Sara 3000 Standing

The Arjo Sara 3000 Standing is a clearly defined product with specific patient and regulatory requirements. The points below summarise what a buyer needs to address before and after purchase.

  • Clinical suitability, confirm with a qualified professional that the patient can bear weight and participate in the transfer.
  • Safe working load, verify for the unit and every accessory in the system before use.
  • LOLER examination, arrange a thorough examination by a competent person before putting the equipment into service and at least every six months thereafter.
  • Decontamination, follow the operating organisation's protocol on receipt of any pre-owned unit.
  • Accessories, confirm charger, sling and any other items required for operation are either included or sourced before the unit arrives.
  • Photographs, on pre-owned listings, photographs form part of the description and should be reviewed alongside any stated condition.
Arjo Sara 3000 Standing Aid with Battery and Controller Standing Aid SelfiMed UK

Ready to move forward with the Arjo Sara 3000 Standing Aid with Battery and Controller?

Shop the Arjo Sara 3000 Standing Aid with Battery and Controller
Articolo precedente Sidhil Innov8 iQ Electric Hospital Bed: How to Choose and What to Expect
Articolo successivo Getting the Most Out of Your Cosmoderm D3M Therapy Chair with Controller

Lascia un commento

* Campi obbligatori