Salta il contenuto
VAT Relief available for eligible patients — save 20% on your order
Next-day dispatch on orders placed before 12noon Monday–Friday
Worldwide delivery with trusted carriers — tracked and insured
Genuine NHS surplus medical equipment — trusted clinical grade
SKU STA1858S01

Stryker 6550 Power-Pro TL XPS Ambulance Stretcher with Compatible Battery & Charger & 2 Poles

Risparmia il 50% Risparmia il 44%
Prezzo originale £3,599.99
Prezzo originale £3,599.99 - Prezzo originale £3,599.99
Prezzo originale £3,599.99
Prezzo attuale £1,999.99
£1,799.99 - £1,999.99
Prezzo attuale £1,999.99
Disponibilità:
in magazzino, pronto per essere spedito
Disponibilità:
Solo 4 a sinistra!
Disponibilità:
Solo 1 a sinistra!

Stryker 6550 Power-PRO TL XPS Ambulance Stretcher, Pre-Owned Powered Patient Transport System with Battery, Charger, Mattress and Poles

The Stryker 6550 Power-PRO TL XPS is a power assisted patient transport stretcher for pre-hospital and emergency transfer work. Battery driven hydraulics raise and lower the litter at the touch of a button, removing the manual lift that drives cumulative back injury in ambulance crews. Rated capacity is 318 kg. The XPS expandable patient surface widens the mattress platform by up to 7.6 cm on each side, which improves lateral stability during transport and accommodates a wider range of patient sizes. This unit is pre-owned and is supplied with a rechargeable battery, charger, mattress, XPS side rails and two push and pull poles.

Stryker 6550 Power-PRO TL XPS powered ambulance stretcher on a white background

What is included

Item Detail Condition
Power-PRO TL XPS stretcher Stryker 6550 powered ambulance stretcher, main unit USED
Rechargeable battery One battery for the powered lift system USED
Power supply and charger Charging unit with mains lead USED
Mattress Patient surface mattress sized for the XPS platform USED
XPS side rails Expandable patient surface side rails USED
Push and pull poles Two poles for manoeuvring the cot USED

What is not included

Item Detail Status
Power-LOAD fastening system Powered cot fastener and its vehicle installation SOLD SEPARATELY
Vehicle cot fastener Any floor mounted or antler style fastener SOLD SEPARATELY
Spare battery Second battery for rotation between charges SOLD SEPARATELY
Patient restraint straps Full restraint set beyond anything shown in the photographs SOLD SEPARATELY
IV pole and equipment hooks Accessory mounted equipment SOLD SEPARATELY
Oxygen cylinder holder Frame mounted cylinder bracket SOLD SEPARATELY
Service and commissioning Engineer inspection, load test and thorough examination SOLD SEPARATELY

Mandatory before any use with a patient

  • This stretcher is lifting equipment used to lift persons. In Great Britain it falls under LOLER 1998 and requires a thorough examination by a competent person at least every six months, with a current report of thorough examination held before the equipment enters service.
  • A qualified service engineer must inspect, function test and load test the unit before it carries a patient, including the hydraulic lift, the manual override, the wheel locks and the retractable head and foot sections.
  • Operators must be trained on the specific cot and on the fastening system fitted to the vehicle before use on the road.
  • The 318 kg rating applies to the stretcher in serviceable condition. Any lower limit set by the vehicle fastener, the loading system or the crew's safe system of work takes precedence.

Key features

Powered lift and descent from battery driven hydraulics, so the crew guides the load rather than lifting it, which is the main control against cumulative handling injury.
318 kg maximum weight capacity, covering bariatric transfers within the limits of the vehicle and the fastening system.
XPS expandable patient surface widening the platform by up to 7.6 cm each side, with locking positions across the range for stability during transport.
Pneumatic backrest adjusting from flat through to a seated position across a 0 to 73 degree range.
Retractable head and foot sections that shorten the cot for tight corridors, lifts and loading, then extend for full length transport.
Manual override so the litter can still be raised and lowered if battery power is lost mid-task.
Dual wheel locks and head end control, reducing unintended movement during transfers and at the vehicle tail lift.
Anodised aluminium frame giving strength at a cot weight of around 59 kg, which matters on stairs and in confined spaces.
Class II double insulated electrical construction on the powered system.
Designed to work with the Stryker Power-LOAD cot fastening system for powered loading and unloading, subject to the compatibility check below.
Accessory ecosystem covering XPS side rails, IV poles and support straps, so an existing fleet's consumables and mounts carry across.

Power-LOAD compatibility check

The Power-PRO platform is designed to interface with the Power-LOAD powered fastening system, but compatibility depends on the exact cot configuration and on the Power-LOAD variant already fitted to the vehicle. Confirm the pairing against the fleet's existing hardware and the Stryker documentation before purchase. Fitting and commissioning of any vehicle fastening system is a specialist installation and is not included.

Technical specifications

Brand Stryker
Model 6550 Power-PRO TL XPS
Type Powered ambulance stretcher, electrically operated
Maximum weight capacity 318 kg, 700 lb
Maximum unassisted lift capacity 318 kg, 700 lb
Cot weight Approximately 59 kg
Overall length 194.3 cm
Minimum length 139.7 cm
Width 58.4 cm
Backrest articulation 0 to 73 degrees, pneumatic
Patient surface XPS expandable, up to 7.6 cm additional width each side
Frame material Anodised aluminium
Power source 24 V battery operated hydraulic system
Operating modes Power assisted with manual override
Electrical classification Class II, double insulated
Safety features Dual wheel locks, load sensing, head end control
Head and foot sections Retractable
Fastening system compatibility Stryker Power-LOAD, subject to configuration check
Intended use Ambulance, emergency services, hospital transfer
Condition Pre-owned, function tested

Pre-owned battery and charger

The battery supplied is pre-owned. Usable capacity in any rechargeable pack falls with age and cycle count, so the number of lift cycles available from a full charge cannot be stated for this unit and must be assessed by the commissioning engineer. Where a service pattern depends on guaranteed runtime, a fresh battery should be fitted and a second pack held on rotation. Charge only with a charger rated for the battery supplied.

Pre-owned electrical and lifting equipment

The unit has been cleaned and inspected. An engineer electrical safety test is recommended before clinical use, alongside the function test, load test and thorough examination described above. Cosmetic marking consistent with previous service use should be expected. The photographs form part of the description and show the actual condition of the item offered.

Delivery and access

  • This is a large, heavy item at approximately 59 kg and 194.3 cm in overall length. Measure every access point on the route, including doorways, corridor turns, lift dimensions and loading bay height, before ordering.
  • Dimensions given are approximate and should be treated as a guide for access planning rather than an exact figure.
  • Delivery is to ground floor only, kerbside or first accessible doorway. Two people should be available to receive and move the item.
  • Return shipping is at the buyer's expense and any delivery fee paid is non-refundable.
Power-PRO TL XPS powered stretcher showing the litter frame and control area

Routine care guidance

Component Action Interval
Battery Check charge state, return to charge after every use, inspect contacts Every shift
Wheel locks and castors Check locks hold, clear debris and thread from the castor spindles Every shift
Lift function Cycle the litter through full travel and confirm the manual override operates Weekly
Mattress and surfaces Decontaminate per local policy, inspect the cover for splits and seam failure After each patient
Frame and fixings Inspect for cracks, deformation, loose fasteners and hydraulic leaks Monthly
Thorough examination Formal examination by a competent person under LOLER 1998 At least every six months

The above is general guidance. The manufacturer instructions for use and the operating service's own decontamination and maintenance policy take precedence. Any unit showing a fault should be taken out of service until it has been repaired and re-tested.

Documents

Free UK Shipping

When you spend £150 or more

Next Day Delivery

Orders before 12 noon (Mon–Fri)

VAT Relief Available

For eligible patients & conditions

Our reviews on Reviewit