Chat disponibile 24/7
Chat disponibile 24/7
Il tuo carrello è vuoto
A well-stocked CPAP accessory kit keeps your therapy setup clean, comfortable and running smoothly night after night. This collection brings together a carefully chosen range of replacement parts and comfort upgrades, including cushions, headgear, filters, hose holders, strap covers and more, so you can find exactly what you need in one place.
A fresh cushion is one of the most effective ways to restore a proper mask seal. This collection includes options for a wide range of popular masks:
Properly fitted headgear helps maintain consistent pressure and reduces mask leaks. Choose from:
Tidy tube routing can reduce tangles, noise and accidental disconnections during the night:
Clean air delivery is an important part of any CPAP setup. The Universal In-Line Bacteria Filter for CPAP and BiPAP Machines fits between the hose and mask to help reduce airborne particles entering the circuit.
Skin irritation and pressure marks from straps and cushions are common concerns. These accessories are designed to help reduce discomfort:
Supporto per tubo CPAP – asta regolabile in altezza antigroviglio Il supporto per tubo CPAP è un accessorio di supporto regolabile e stabile, proge...
Visualizza tutti i dettagliCopritubo CPAP – morbido, isolante e anticondensa Il copritubo CPAP aggiunge comfort, isolamento e protezione al vostro apparecchio CPAP o BiPAP. R...
Visualizza tutti i dettagliGancio per maschera e porta-tubo CPAP – riposo sicuro e ordinato Il gancio per maschera e porta-tubo CPAP è una soluzione pratica e resistente per ...
Visualizza tutti i dettagliCuscinetto di ricambio AirTouch F20 Comfort elevato con il cuscinetto AirTouch F20 Il cuscinetto AirTouch F20 è progettato specificamente per offri...
Visualizza tutti i dettagliCuscino ResMed AirFit F40, cuscino facciale AdaptiSeal originale Il cuscino ResMed AirFit F40 è un cuscino facciale AdaptiSeal originale, proget...
Visualizza tutti i dettagliGomito girevole Alvera AirLink 360 per maschere AirFit F20, AirTouch F20 e AirFit F30 Alvera AirLink 360 è un gomito di raccordo compatibile per...
Visualizza tutti i dettagliI vantaggi del cuscinetto AirFit F20 Una buona tenuta Il cuscinetto AirFit F20 è progettato per offrire un'ottima aderenza alla maschera CPAP. Graz...
Visualizza tutti i dettagliCoprimaschera CPAP – Set di 6 coprimaschera CPAP con cuscinetti facciali Il set di 6 coprimaschera CPAP offre maggiore comfort e protezione della p...
Visualizza tutti i dettagliCuscinetto nasale ResMed AirFit N30i Il cuscinetto nasale ResMed AirFit N30i è la guarnizione in silicone che si fissa al telaio della masch...
Visualizza tutti i dettagliCopricinghie CPAP – accessori morbidi, traspiranti e riutilizzabili per il comfort I copricinghie CPAP offrono maggiore comfort, traspirabilità e p...
Visualizza tutti i dettagliFodere per cinghie CPAP – imbottiture morbide per un sostegno delicato della maschera (confezione da 4) Le fodere per cinghie CPAP sono progettate ...
Visualizza tutti i dettagliFascia e cuscinetto per il collo CPAP – Accessorio imbottito universale per il comfort La Fascia e cuscinetto per il collo CPAP è un accessorio uni...
Visualizza tutti i dettagliCuscinetto ResMed AirTouch N20 – cuscinetto nasale di ricambio in memory foam Il cuscinetto ResMed AirTouch N20 è un cuscinetto nasale di ricambio...
Visualizza tutti i dettagliCuscinetto ResMed AirFit N20 – ricambio nasale in silicone Il cuscinetto ResMed AirFit N20 è un cuscinetto nasale di ricambio progettato per l'uso...
Visualizza tutti i dettagliFascia protettiva CPAP per naso e viso – Comfort ergonomico e protezione La Fascia protettiva CPAP per naso e viso è un accessorio morbido ed ergon...
Visualizza tutti i dettagliCopricapo ResMed AirFit F40 con clip magnetiche Il copricapo ResMed AirFit F40 è un copricapo di ricambio progettato per la maschera CPAP oronasale...
Visualizza tutti i dettagliCuscinetto nasale ResMed AirFit P10 Il cuscinetto nasale ResMed AirFit P10 è un ricambio originale progettato per la maschera CPAP a cuscinetti ...
Visualizza tutti i dettagliCuscinetto nasale AirFit P10 per una terapia CPAP confortevole ed efficace Il cuscinetto nasale AirFit P10 è un accessorio di ricambio per maschera...
Visualizza tutti i dettagliCuscinetto Fisher & Paykel Vitera per maschera CPAP oronasale Il cuscinetto oronasale Fisher & Paykel Vitera è un ricambio originale proget...
Visualizza tutti i dettagliCuscinetto di ricambio AirFit N20 Questo cuscinetto di ricambio AirFit N20 è un componente di consumo nuovo, progettato per ripristinare la tenuta ...
Visualizza tutti i dettagliCopricapo di ricambio AirFit F40 per ResMed AirFit F40 con clip magnetiche Il copricapo di ricambio AirFit F40 è progettato specificamente per l'us...
Visualizza tutti i dettagliCopricapo Alvera AirStrap per maschere facciali AirFit F20 e AirTouch F20 Il copricapo Alvera AirStrap è un copricapo di ricambio compatibile pe...
Visualizza tutti i dettagliCamera d'acqua per umidificatore CPAP Fisher & Paykel SleepStyle La camera d'acqua Fisher & Paykel SleepStyle è una camera per umidificator...
Visualizza tutti i dettagliClip magnetiche per copricapo Alvera AirStrap, 4 pezzi, per maschere AirFit N20, F20, F30 e AirTouch F20, N20 Le clip magnetiche per copricapo A...
Visualizza tutti i dettagliGenuine replacement water chambers for ResMed, Philips and Fisher & Paykel humidifiers, keeping your therapy comfortable and moisture-balanced every night.
Standard, slim-line and heated CPAP tubing compatible with all major machines. Replace worn or kinked tubing to maintain consistent airflow and pressure delivery.
Disposable and reusable filters protect your machine's motor and ensure the air you breathe is clean. Replace regularly for optimal performance and longevity.
Eligible patients with a qualifying chronic illness or disability can claim VAT Relief on CPAP accessories, saving 20% at checkout.
CPAP Machine Accessories
CPAP tubing should be replaced every 3 to 6 months under normal use. Over time, tubing can develop micro-cracks, become stiff or discoloured, and harbour moisture or residue that is difficult to remove even with regular cleaning.
Signs that your tubing needs replacing include visible discolouration, a persistent musty odour, cracks or splits along the length, or a reduction in therapy pressure caused by small undetected leaks.
Standard 22mm tubing is compatible with most CPAP, APAP and BiPAP machines. If your machine uses heated tubing such as the ResMed ClimateLineAir or Philips HeatedTube, ensure you purchase the correct heated tube for your specific model.
Water chambers should be replaced every 6 to 12 months. Over time, the plastic can become cloudy, develop mineral deposits from water, or show fine scratches that trap bacteria and are impossible to clean effectively.
Always use distilled or sterile water in your humidifier chamber. Tap water contains minerals that accelerate scaling and deposit build-up, shortening the life of the chamber and potentially harming the heating plate.
If you notice white or grey deposits inside the chamber, persistent cloudiness, or cracks in the plastic, replace the chamber immediately rather than continuing to use it.
Distilled water is the only recommended type for use in CPAP humidifier chambers. Distilled water has had its mineral content removed, which prevents limescale build-up on the heating plate and inside the chamber.
Tap water, even in soft water areas, contains dissolved minerals that will gradually coat the heating element and chamber walls, reducing humidifier efficiency and shortening the component's life.
Bottled mineral water should also be avoided as it contains minerals by definition. In an emergency while travelling, cooled boiled water is an acceptable short-term substitute, but distilled water should be resumed as soon as possible.
Most CPAP machines use two types of filter:
Disposable fine filters should be replaced every 2 to 4 weeks. These thin white filters capture dust, pollen and fine particulates. They cannot be washed and must be discarded when discoloured.
Reusable foam filters should be rinsed with water weekly, allowed to dry completely, and replaced every 3 to 6 months or when they show signs of wear, tearing or persistent discolouration.
If you live in a dusty environment, have pets, or suffer from allergies, replace filters more frequently. A clogged filter restricts airflow, causes the machine to work harder and can reduce therapy effectiveness.
Always check your specific machine's user manual for the exact filter types and replacement schedule recommended by the manufacturer.
Standard tubing is unheated and works with all CPAP machines. It is the most widely used type and is suitable for most patients. The main limitation is that moisture from the humidifier can condense inside the tube if there is a temperature difference between the machine and the room, a phenomenon known as rainout.
Heated tubing contains a fine heating element that warms the air as it travels from the machine to the mask, preventing condensation and rainout. It significantly improves comfort for patients who experience moisture in the tube or who use high humidification settings.
Heated tubes are proprietary and model-specific. The ResMed ClimateLineAir, Philips HeatedTube and Fisher & Paykel ThermoSmart tube are not interchangeable. Ensure you purchase the heated tube designed for your specific machine model.
Daily: empty any remaining water from the chamber each morning and leave it open to air dry. Do not leave standing water in the chamber between uses.
Weekly: disassemble the water chamber and wash it in warm water with a small amount of mild, fragrance-free dish soap. Rinse thoroughly and allow to air dry completely before refilling.
For tubing, hang it vertically after washing to allow water to drain and dry from the inside. A tube cleaning brush is useful for removing any residue from the inner surface.
Avoid the dishwasher, bleach, alcohol-based cleaners or ozone cleaning devices for water chambers and tubing, as these can damage seals, degrade plastic and leave harmful residues.
Standard 22mm tubing is universal and compatible with virtually all CPAP, APAP and BiPAP machines regardless of manufacturer. Standard filters with the same dimensions are also broadly interchangeable, though it is always best to use the manufacturer's recommended filter for your specific model.
Water chambers are not interchangeable between brands or models. Each humidifier tub is designed to clip, slide or lock into a specific machine housing. Always check the model compatibility before ordering a replacement chamber.
Heated tubing is brand and model specific and cannot be used across different manufacturers. If you are uncertain about compatibility, contact our team and we will confirm the correct part for your machine.
A complete CPAP setup requires the following essential accessories:
CPAP tubing: connects your machine to your mask. Standard 22mm tubing is supplied with most machines, but a spare is recommended.
Water chamber: if your machine has an integrated humidifier, a water chamber will either be included or available separately. Fill it with distilled water before each use.
Filters: ensure your machine has a clean filter installed before first use. Check whether your model uses disposable, reusable or both types.
Mask: select the appropriate mask type and size for your breathing pattern and facial anatomy.
Optional but recommended accessories include a CPAP travel bag, a DC power cable for travel, mask wipes for daily cleaning and a tube cleaning brush for weekly maintenance.
Yes. CPAP accessories including tubing, water chambers, filters and cleaning supplies are eligible for VAT Relief under Group 12 of Schedule 8 of the Value Added Tax Act 1994, provided they are purchased by an individual with a qualifying chronic illness or disability for personal use.
To claim VAT Relief, tick the declaration at checkout confirming your eligibility. This reduces the purchase price by 20%. No GP letter or formal prescription is required, but the declaration must be truthful. Making a false declaration is a criminal offence under UK law.
10%OFF
your first order of CPAP supplies
Welcome to SelfiMed UK
Join our email list for CPAP and home-care tips, new arrivals and offers. Your code appears straight away.
By signing up you agree to receive marketing emails from SelfiMed UK. Unsubscribe at any time. One use per customer, first order only. Valid on CPAP masks, cushions, tubing, filters and other supplies; not on machines or medical equipment.
You're in
We've also added it to your basket, so it applies at checkout automatically.
One use per customer, first order only. Valid on supplies, not on machines or equipment.