Needs Help?
24/7 Chat Available
24/7 Chat Available
Brand new
Brand
Philips
Leeds, United Kingdom
- UK stock, dispatched from Leeds
All products / CPAP Mask Accessories
Frame Faceplate for DreamWisp Nasal CPAP Mask
PhilipsSKU FRC219401
Price
£3899
Price shown excludes VAT.
VAT relief available on this product
Eligible customers can claim VAT relief on this product at checkout.
Unit price£38.99
Total£38.99
You save£0.00
Prefer a quote?
Frequently bought together
Add the whole set in one go.
Frame Faceplate for DreamWisp Nasal CPAP Mask
£38.99
This item
Total for the set
£0.00
Key attributes
- Brand
- Philips
- Category
- CPAP Mask Accessories
- SKU
- FRC219401
- Condition
- New
- Warranty
- 12 months
Philips Respironics DreamWisp Frame Faceplate, Genuine Spare Part
The DreamWisp faceplate is the soft silicone body of the mask. Air enters at the elbow on the crown of the head and travels through the hollow frame down to the cushion under the nose, so nothing crosses the bridge of the nose and the line of sight stays clear.
This is a genuine Philips Respironics spare part in one universal size, supplied on its own. It fits the DreamWisp nasal mask and no other mask, including the Wisp.
What is included
| Item | Detail | Condition |
|---|---|---|
| DreamWisp frame faceplate | Hollow silicone faceplate, one universal size | NEW |
What is not included
| Item | Detail | Status |
|---|---|---|
| Cushion | Over the nose cushion, sized to the wearer | SOLD SEPARATELY |
| Frame connector | Joins the faceplate to the tube assembly | SOLD SEPARATELY |
| Elbow and swivel | Connects the air tubing at the crown and carries the vent | SOLD SEPARATELY |
| Headgear and clips | Strap assembly with its attachment clips | SOLD SEPARATELY |
| Complete mask | This listing is a spare part, not a full mask system | NOT INCLUDED |
Magnets in the DreamWisp headgear: manufacturer contraindication
- DreamWisp headgear attaches with magnetic clips. Philips Respironics issued a field safety notice and updated labelling for its masks with magnetic clips, adding a contraindication.
- The mask is contraindicated where the wearer, or a household member, carer or bed partner in close proximity, has a pacemaker, an implantable cardioverter defibrillator, a neurostimulator, a programmable cerebrospinal fluid shunt, an aneurysm clip, a metallic stent, an ocular or cochlear implant, an insulin pump, magnetic metallic implants, or any implant labelled as unsafe in a magnetic field.
- Where nobody in that group is affected, the mask may be used following the manufacturer's updated instructions, keeping it at least 15 cm from any implant or device that magnetic fields could affect. The magnets are active whether or not the mask is being worn, including while it rests on a bedside table.
- Anyone unsure whether an implant is affected should speak to the clinical service before using the mask, and the current DreamWisp instructions for use should be read in full.
How the faceplate works and why it is renewed
Most masks separate structure from air path: a rigid frame holds the mask on, a tube feeds it. DreamWisp merges the two. The faceplate is soft silicone and hollow, so it holds the mask against the face while carrying the therapy air, which is what moves the hose connection to the crown of the head and leaves the face clear. Because the air travels down both sides, compressing one side against a pillow simply redirects flow through the other, which is the design feature that makes the mask work for side and front sleepers.
The consequence is that the faceplate is part of the air path rather than a chassis. A split, a crack or a perforation anywhere in it is a leak in the circuit, not a cosmetic defect, and it will show up as lost pressure and a mask that no longer seals. Silicone in nightly contact with skin oils also gradually loses its grip and its spring, and the usual response, tightening the headgear, presses the cushion harder into the face and tends to make leak and skin marking worse rather than better. Renewing the faceplate is the correct answer at that point and is considerably cheaper than a complete mask.
Two limits are worth stating. The faceplate fits the DreamWisp nasal mask only. It is not interchangeable with the Wisp, which is a different mask despite the similar name, and not with DreamWear, which uses its own sized frames. And it is one component of several: a working mask also needs the cushion, frame connector, elbow and headgear, none of which are supplied here.
Key features
Hollow in-frame airflow, carrying therapy air through the faceplate itself, so the mask body is the duct and no tube crosses the face.
Dual path flow, redirecting through the opposite side when one side is compressed against a pillow, so a change of sleeping position does not interrupt therapy.
Tube connection at the crown of the head, keeping the hose off the pillow and out of the way for side and front sleepers.
Soft silicone with minimal face contact, following facial contours instead of clamping across them, which reduces the pressure points that show as marks in the morning.
Clear line of sight, leaving the field of vision open for reading or wearing glasses before sleep, which is the single most cited reason people move to this mask family.
One universal size, fitting every DreamWisp nasal mask, so there is no frame sizing decision to get wrong when ordering a spare.
Contains no latex, keeping the part usable by wearers with a latex sensitivity.
Dishwasher safe on the top rack, once a week at most, which makes the weekly clean a matter of loading it rather than washing by hand.
Genuine Philips Respironics part, holding the tolerances the cushion seal and vent flow were designed around, which a copied part cannot be relied on to do.
Technical specifications
| Manufacturer | Philips Respironics |
| Product | DreamWisp frame faceplate |
| Part type | Genuine spare part |
| Condition | New |
| Part number | 1137970 |
| GTIN | 00606959416895 |
| Material | Silicone. Contains no latex |
| Size | One universal size |
| Air path | Hollow in-frame channels, elbow connection at the crown |
| Compatibility | DreamWisp nasal mask only. Not compatible with the Wisp nasal mask or with DreamWear |
| Headgear attachment | Magnetic clips. See the contraindication above |
| Dishwasher | Top rack, once a week at most |
Specification limited to what is confirmed
- The part number and GTIN above are confirmed against the pack before dispatch. The GTIN check digit has been verified as valid.
- Renewal interval, faceplate weight and dimensions are not published by the manufacturer for this component and have been left out rather than estimated.
- Whether the faceplate supplied carries a magnet, a ferrous receiving plate or neither depends on the revision, and is confirmed on request. The contraindication above applies to the DreamWisp mask system as a whole.
Cleaning
By hand, weekly. Submerge fully in warm water with a mild detergent, allowing water to fill the hollow interior. Wipe the outside with a soft cloth, rinse thoroughly, then shake the interior clear and air dry away from direct sunlight. The inside must be completely dry before the mask is used again.
In a dishwasher, once a week at most. Top rack only. More frequent dishwasher cleaning shortens the life of the silicone.
Never use bleach, alcohol, antibacterial sprays, all-purpose cleaners or household cleaning products. Residues left inside a hollow frame sit in the air path and are then breathed for hours. Products intended for CPAP equipment, or mild detergent and water, are the only appropriate options.
Routine care schedule
| Task | Interval |
|---|---|
| Wipe the faceplate and cushion after use | Daily |
| Full wash by hand, or dishwasher on the top rack | Weekly |
| Inspect for splits, cracks, hardening or discolouration | Weekly |
| Renew the faceplate | When damage, hardening or persistent leak appears, following the mask instructions |
| Renew the cushion | To the interval in the mask instructions, more often than the faceplate |
Intervals follow manufacturer guidance and are shortened where the mask is used in a shared or institutional setting.
Key attributes
- Condition
- New
- Warranty
- 12 months
Packaging and delivery
- Units per pack
- 1
Specifications can change without notice. Ask us for the current technical file.
Shipping
| Destination | Light items, 0 to 30 kg | Heavy and bulky items |
|---|---|---|
| UK mainland | Ordered before 1pm Monday to Friday, dispatched the same working day from Leeds | 2 to 4 working days |
| UK islands and remote areas | 1 to 3 working days | 5 to 10 working days |
| Europe, USA and Canada | 1 to 3 working days | 10 to 21 working days |
| Rest of the world | 5 to 7 working days | 10 to 21 working days |
Deliveries run Monday to Saturday. There are no Sunday deliveries.
Customs and duties
Orders shipped outside the United Kingdom may attract import duty and local tax, which are charged by the destination country and are the buyer's responsibility.
Returns
| Returns | |
|---|---|
| Return period | SelfiMed offers a 30-day change-of-mind return policy on eligible items. Please contact us within 30 days of delivery to request a return. |
| Return condition | Items must be returned in the same condition as received and must be suitable for resale. |
| Brand new items | Brand new items must remain unopened, unused and in their original packaging. Once opened or used, an item may no longer qualify for return as new, and any accepted return may be subject to restocking fees. |
| Hygiene exclusions | Opened CPAP masks, CPAP parts and CPAP accessories, including tubing, filters and humidifier chambers, cannot be returned for hygiene reasons. |
| Return shipping | Return shipping costs are the responsibility of the customer. |
| Statutory rights | This policy does not affect your statutory rights. |
| Refunds | |
|---|---|
| Refund processing | Refunds are issued to the original payment method once the returned item has reached us and been inspected, normally within five working days. |
| Faulty items | Faulty items are refunded in full, including the original delivery charge paid. |
This does not affect your statutory rights.
Information on this page is provided for guidance and does not replace advice from a qualified clinician. Always read the manufacturer's instructions before use, and check that a device is suitable for the patient and the prescribed therapy.
Specifications and compatibility are given in good faith and can change without notice.
Ordered with this
Goes on the same order.
Other lines in this category
More in the same category.
Recently viewed
Picking up where you left off.
UK Mainland Next Day Delivery
Order by 1pm, Mon-Fri. Delivery available Mon-Sat.
Global Shipping
Worldwide delivery – trusted carriers
VAT Relief Available
For eligible patients & conditions
Meical Equipment Advice and Guidance
Latest from Our Blog
August 26, 2026
ResMed QuietAir Elbow: Common Mistakes and How to Avoid Them
Avoid the most common fitting, cleaning and ordering mistakes with the ResMed QuietAir Elbow. Practical, factual guidance for clinicians ...
Read Article
August 26, 2026
Sidhil Innov8 iQ Electric Bed: How to Choose and What to Expect
A plain factual guide to the Sidhil Innov8 iQ Electric profiling bed: what it does, what to check before ordering and what maintenance in...
Read Article
August 26, 2026
ALVERA PureGuard™ Universal In-Line: Common Mistakes and How to Avoid Them
Avoid the most common installation, maintenance and ordering mistakes with the ALVERA PureGuard™ Universal In-Line filter, with plain fac...
Read Article